Question about Dryers
MOST KENMORE/WHIRLPOOL ARE FRONT OPEN.NO SCREWS,ITS POP OPEN,PRY WITH PLASTIC CROWBAR.UNPLUG POWER PL.
Posted on Feb 20, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I take the timed approach with appliance problems. If they occur 10 years after purchase, I buy a new one. If five years, I call a repair service and measure the cost of repair against the purchase of a replacement. If one year or less after purchase, I pile the expensive, offending, useless lump of an example of the decline of American workmanship into the back of my pickup and push it out on the doorstep of the store where I purchased it.
I find this method to be the most cost-effective and least troubling. And costs me about the same as calling the repair service.
In fact, right now I'm loading up my Kenmore Elite Oasis 6705, purchased March 13, 2007, (note that the problem began one month AFTER the warranty ran out) in the back of my pickup and I will make at quick stop at Sears to push it off the back of my truck (I find if I don't stop, but keep the truck rolling it makes for a much louder and attention grabbing drop off) then find the nearest hardware store so I can purchase some strong nylon line to string across my backyard so I can dry my clothes. I also purchase a bit of extra line so that I have enough to string up any Sears or Kenmore representatives who might stop by to inquire about the appliance they found on their doorstep.
Posted on Apr 12, 2008
SOURCE: help getting kenmore dryer apart
remove the two top lint screen screws,pull the top toward you and up,remove the two front panel screws one on each side top,disconnect the door switch,pull up and out and your in the dryer,let me know if you need more help-mike
Posted on May 28, 2009
Here is a couple of websites that shows the breakdown and parts of dryers, maybe they will have your model to help show where the two springs go.
You could also try this website.
I hope this helps
Posted on Oct 06, 2009
SOURCE: Kenmore Elite dryer won't heat
if no heat at all unplug the dryer take off the vent take out the screws holding the back on there is a long oval shaped tube with two wires going into it there is a holding bracket holding it in place take out the screw unhook the wires take out a screw holds the heating coil in take out that screw inspect the heating coil for breaks it sounds like it is burned out if so replace if not it is probably the oval shaped thermostat on the tube i do hope that this was helpful then reverse the procedure, thank you.
Posted on Dec 31, 2009
Tips for a great answer:
Dec 12, 2015 | Kenmore HE5 Electric Dryer
Jul 05, 2014 | Kenmore Elite HE3 Steam 8674 Dryer
Jun 26, 2014 | Kenmore Elite Oasis ST 7806 Dryer
Oct 06, 2009 | Kenmore 67082 Electric Dryer
Aug 18, 2009 | Dryers
Mar 15, 2009 | Kenmore Elite HE4 Electric Dryer
Mar 10, 2009 | Kenmore Elite HE4 Electric Dryer
Jan 19, 2009 | Kenmore Elite HE4 Electric Dryer
173 people viewed this question
Usually answered in minutes!