Question about Teac DVD & Blu-Ray Players

Open Question

Teac DV-3120 - dvd's won't load, says wrong disc

I have a teac DV-3120 dvd player and recently I used a multi-region code that I got of the internet to play other region dvds and it was working fine, then 2 weeks later it just started saying wrong disc to every disc I put into it, no matter what region it is. Please help :)

Posted by on

3 Suggested Answers

spare_head_2
  • 47 Answers

SOURCE: Unlock procedure for Regions

Hi Krokodil,

So far I've not been able to find anything for this one. But you could try one hacks that's in the same model family because they may share the same firmware (embedded software). Try the hack for the Teac DV-4000. Look at this page.


Sorry that's all I can suggest.

Regards,

Spare head 2.

Posted on Jan 04, 2008

  • 3 Answers

SOURCE: Unlock procedure for Regions

1. Press Open/Close on remote control. DVD tray opens. 2. Press the following buttons in sequence: 2, 8, 1, 2. 3. TV displays "Region 2" 4. Press the Enter button on the remote until code changes to 9 5. Press the Open/Close on the remote. DVD tray closes. 6. Press Power on the remote control. Now code free...

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: unlock region codes for teac dvd player, model dv-4180

Hi Pacificmarli

I found the following Multizone Instructions for Teac DV-4180:

  1. Open the disc door
  2. Press Setup, Vol +, Vol -, Vol +, Vol - on the remote control
  3. Press < or > on the remote control to select the region code (255 is all regions)
  4. Press 'enter' to confirm
  5. Close disc tray
Hope this helps.

Miche

Posted on Feb 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Owner manual teac dvd player dv 3120


You may download a copy of the manual here.

Feb 28, 2012 | Teac DVD & Blu-Ray Players

1 Answer

Does anyone know how to de-code or hack a TEAC DV-H500 cd/dvd player. After owning for several years i still can't play or watch many disc's. Many Thanks


This works with some dvd players, don't know if it'll work with yours... With the remote, open the tray... punch in 9,9,9,9...and then enter, and then '0' and hit enter again. This breaks the region code or allows playing of any disk.

Jan 06, 2011 | Teac DV-H500 DVD Player

1 Answer

I have this exact problem!


I found a couple of region 1 DVDs and tested them in the player they worked so that's the solution?!

Jun 19, 2009 | Teac DV-3000 DVD Player

1 Answer

Region Unlock TEAC PL-D3200


Multizone code for Teac PL-D3200 Here is the procedure to unlock your Teac PL-D3200 to play all zones of DVD's. 
Using your remote control: 
1. Switch power on 2. Open the dvd tray (leave it open with no dvd in it) 3. Press "stop" 4. Press "734466" 5. Use cursor to scroll up or down until it says "Region 0" 6. Press "OK/Enter" 7. Switch power off 8. Switch power on 
It will now play all region DVD's! :-) 

Nov 28, 2008 | Teac DV-H500 DVD Player

1 Answer

Region


Probably can't, they are encoded for a reason. If you have a DVD drive on your computer MOST video players will play them.I use Nero and haven't had any trouble.

MM85

Jul 22, 2008 | Teac DV-3000 DVD Player

1 Answer

Unlock region codes for teac dvd player, model dv-4180


Hi Pacificmarli

I found the following Multizone Instructions for Teac DV-4180:
  1. Open the disc door
  2. Press Setup, Vol +, Vol -, Vol +, Vol - on the remote control
  3. Press < or > on the remote control to select the region code (255 is all regions)
  4. Press 'enter' to confirm
  5. Close disc tray
Hope this helps.

Miche

Jun 12, 2008 | DVD & Blu-Ray Players

1 Answer

Dvd multi zone


to change it to multiregion i:

OPEN TRAY
PRESS SETUP
VOL UP
VOL DOWN
VOL UP
VOL DOWN

Then a number appears in the top right corner of screen.

Use your left and right directional button to change the number to 255 for all regions.

CLOSE TRAY

Apr 19, 2008 | DVD & Blu-Ray Players

2 Answers

Unlock procedure for Regions


1. Press Open/Close on remote control. DVD tray opens. 2. Press the following buttons in sequence: 2, 8, 1, 2. 3. TV displays "Region 2" 4. Press the Enter button on the remote until code changes to 9 5. Press the Open/Close on the remote. DVD tray closes. 6. Press Power on the remote control. Now code free...

Feb 19, 2008 | DVD & Blu-Ray Players

4 Answers

Unlock DVD Region code Many thanks DAC


i have got teac 3120 , but it only plays pal 2 ...could you help me to unlock region 2 ....so i can have both region 2 and 4 to play/watch

Dec 18, 2007 | Sony DVP-NC665P/S Multi-disc DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac DVD & Blu-Ray Players Experts

JOHN TOPLISS

Level 2 Expert

135 Answers

kakima

Level 3 Expert

96372 Answers

kingtwomp

Level 2 Expert

158 Answers

Are you a Teac DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...