Question about Trendware TEW-424UB (0710931502572) 802.11g/b Wireless Adapter

Open Question

Telkom ADSL 5102G

I made an upgrade of the firmware of the above mentioned router.After the upgrade I have no access anymore to the interface settings. I get access to the status side only. What must I do to get access to the settings again?

Posted by on

  • 2 more comments 
  • Terence_L Dec 18, 2008

    I upgraded my firmware and now all i have acess to in the router settings is status. I need to beable to change the other stuff on my router for networking and now im stuck, what can i do?

  • Anonymous Dec 19, 2008

    I upgraded my firmware and now all i have acess to in the router settings is status. I need to beable to change the other stuff on my router for networking and now im stuck, what can i do? I GAVE THE WRONG EMAIL ADRES THE FIRST TIME

  • hostagerescu Mar 08, 2009

    i just upgraded firmware on router 5102g to 2.7.0.23(ZUE0.B1)3.3.2.5 but now cant change setting only see status and device info plz help

  • marcelkell Apr 10, 2009

    No ac access to setup after FW upgrade Only status page avail. How now???


×

3 Suggested Answers

neoranjit
  • 310 Answers

SOURCE: Telkom 5102g Vista wireless problem

saw this issue in another forum. try this link
http://forums.techguy.org/windows-vista-7/648419-solved-vista-business-wireless-woes.html
hope this helps
Thanks
Ranjit

Posted on Aug 24, 2009

  • 1 Answer

SOURCE: Trendnet TEW-435BRM Adsl Modem Router, no internet???

So after finding out that the firmware doesn't have an update, searching the web and asking tech support at my ISP, i still didn't know what the problem was.So i called Telkom (our only telecomunications provider) waited on the line for nearly 45min to hear that they also didn't know. I finally got put through to the people than install the ADSL and he just said. "I'll just activate the line for you ,ok?" And i'm thinking WTF!!!!! He explained that although there was a connection, and i recieved an IP and all that, the datatransfer was not activated. He pressed one button!!! Why my ISP couldn't tell me that i don't know. 5min later everything is working fine.

Posted on Jul 21, 2008

  • 1 Answer

SOURCE: Wireless connection to internet

Hi,
I just got it all working [new notebook running Vista], connecting to the net via the telkom 5102G - with a PC running XP connecting via LAN.

The 5102G comes ready configured with a network key / code [stuck on the back] so use that to connect to the router - once you've connected it'll come up with limited connectivity.

I then ran the firmware upgrade from http://www.telkomphones.co.za/5102g.htm
To do this, download and unpack the thing. In your browser, go to 10.0.0.2 [for the router config] and click on firmware and follow the instructions.

Once this is done - disconnect and reconnect the vista laptop connection. Open your browser and simply click on tools and uncheck the tickbox alongside "work offline".

I know that sounds ridiculous but that's exactly what I did and I'm surfing fine.

Now... just need to share files and printer and we're 100%.

Hope that helps.

Posted on Jul 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Duo plus 300wr router. My connection keeps timing


Trying doing some "ping" and "internet speed" tests. Then you will have a better idea of what kind of download speed you are actually getting. You can also use your "Performance" function in "task manager" to monitor your internet network activity. That should give you the kind of information you need to actually troubleshoot the problem.

Oct 19, 2013 | Computers & Internet

1 Answer

Connection from billion 400g wireless adsl router to Fujitsu


please check your fujistu if there is wireless lan built-in...

Jun 16, 2009 | NetGear DG834G 802.11G Wireless ADSL...

1 Answer

Trendnet TEW-435BRM Adsl Modem Router, no internet???


So after finding out that the firmware doesn't have an update, searching the web and asking tech support at my ISP, i still didn't know what the problem was.So i called Telkom (our only telecomunications provider) waited on the line for nearly 45min to hear that they also didn't know. I finally got put through to the people than install the ADSL and he just said. "I'll just activate the line for you ,ok?" And i'm thinking WTF!!!!! He explained that although there was a connection, and i recieved an IP and all that, the datatransfer was not activated. He pressed one button!!! Why my ISP couldn't tell me that i don't know. 5min later everything is working fine.

Jul 21, 2008 | Trendware TRENDnet TEW-435BRM 802.11g...

2 Answers

Draytek Vigor 110 modem


There is no default username or password to access the Vigor routers. Reset the router to clear any previous settings from its memory. Default IP Address is http://192.168.1.1 Manuals and firmware is available from the device maker.

May 17, 2008 | Draytek Computers & Internet

3 Answers

Need installation software


I have a westell usb adapter 802.11g, and I was unable to install the computer even lowering driver 211wg-01-A90 Please if I can help him agradecere

Apr 22, 2008 | Computers & Internet

2 Answers

Wireless connection to internet


Hi,
I just got it all working [new notebook running Vista], connecting to the net via the telkom 5102G - with a PC running XP connecting via LAN.

The 5102G comes ready configured with a network key / code [stuck on the back] so use that to connect to the router - once you've connected it'll come up with limited connectivity.

I then ran the firmware upgrade from http://www.telkomphones.co.za/5102g.htm
To do this, download and unpack the thing. In your browser, go to 10.0.0.2 [for the router config] and click on firmware and follow the instructions.

Once this is done - disconnect and reconnect the vista laptop connection. Open your browser and simply click on tools and uncheck the tickbox alongside "work offline".

I know that sounds ridiculous but that's exactly what I did and I'm surfing fine.

Now... just need to share files and printer and we're 100%.

Hope that helps.

Jan 16, 2008 | Computers & Internet

1 Answer

Belkin Router - Network works for 5 minutes than everything loses internet capability.


hi,

           This issue usally occurs when the router is able to save the data stored or in  other words the Router id not able to AUTHENTICATE,  but as you already got a new router and you have already done the fireware upgradation of the router. we can also upgrade the firmware of your speedstream modem.

 

plz do these following steps ,( plz disconect the router from the computer and modem completly while doing the steps )

 

 

 

The Efficient 5260 modems that can be upgraded are as follows:

Look on the label on the bottom of your modem. It should read:

SpeedStream 5260 Ethernet ADSL Modem
Part Number: 060-5660-00x (where x=any number)
Revision: any (all revisions seem to work)

If your part number reads anything else, your modem is most likely not upgradable.

For those curious, 5660 models 003 and earlier do NOT support G.Lite ADSL, only DMT. If you are buying a 5260 or 5660 model secondhand, and your DSL ISP uses G.Lite DSL, it would be a good idea to check with the person selling you the DSL modem.

UPDATE: As of 5660 Firmware v2.3.0(2) and later all 5660 including 5260/5660 hybrids support G.Lite ADSL. It pays to use the latest Firmware.

 

 

 

PLZ REPLY IF THIS HELPS, I WILL TRY TO FIND OUT THE RESOLUTION FOR THIS ISSUE

 

REGARDS.

Gunjan ';';';';';';';

Oct 18, 2007 | Belkin (F5D8231-4) Wireless Router...

2 Answers

My 3com officeconnect doesn't work after upgrding the firmware


Are you able to login to the router? If you can reset the router to factory defaults..If you can't login to the router...Is there an external reset button on the router you could try to reset. with a paperclip? Otherwise, I had this happen on a linksys router/switch. New router time. You should just return it where you purchased the product. There was already something seemingly going wrong if it was rebooting. 3 weeks? just return it. don't even mention the firmware update. Here is the site info for 3com: http://knowledgebase.3com.com/ OfficeConnect - Firmware upgrade fails with incorrect user interface image Problem: Incorrect user interface image Problem: Firmware upgrade fails Problem: Error when upgrading firmware Problem: Incorrect firmware Problem: Wrong firmware Fact: Firmware Fact: Download Fact: Update Fact: Upgrade Cause: The downloaded .exe has not been extracted Fix: The downloaded .exe needs to be extracted by double clicking on it. When performing the firmware update use the extracted files that were obtained from the "exe" file. e.g You will obtain a "bin" or "dlf" type of file which is the firmware required for your upgrade. Let me know what happens. Good Luck, Tim

Mar 16, 2007 | 3Com OfficeConnect Remote 612 ADSL Router

Not finding what you are looking for?
Trendware TEW-424UB (0710931502572) 802.11g/b Wireless Adapter Logo

Related Topics:

1,325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Dan Castro

Level 2 Expert

329 Answers

Are you a Trendware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...