Question about Hoover Vacuums

1 Answer

Reset button Hoover - Hoover Vacuums

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The majority of hoovers do not have reset buttons. Some vacuums that do, have one that only controls the brush roller when they are run by a separate motor. I would really need the machines model number to properly answer your question.

Although they do not have "reset" buttons, most do have thermal resets. If the vacuum motor overheats. Turn off, unplug and wait for 1 hour or more for the thermalfuse to "reset" itself. Also, clean or replace all bags/filters because that's usually the cause of overheat in the first place.

Also, vacuums go dead for a number of electrical reasons. Many of the Hoover uprights have an internal switch in the upper body below the handle that commonly fails and needs replaced.

Hope this helps.

Posted on Feb 22, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover has no power. Is there a reset button?


Important Notice Regarding Hoover WindTunnel Series REWIND Bagless Upright... I found some interesting reading here that could pertain to you. Thank you and leave feedback for I am new at this. James please have a great day!

Jul 14, 2016 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Where is the reset button on the Panasonic hoover


To reset what? Not heard of a reset button for a Hoover?

Oct 25, 2014 | Vacuums

1 Answer

Hoover c1810 bagged upright - power keeps cutting out - is there a reset button?


there might be a reset button on there but its not meant for continuous use. we need to figure out the problem why the power cuts out. what condition is the cord in? cuts nicks. also check the prongs on the plug. if not that could be a bad switch but it sounds like a loose connection

Jan 02, 2010 | Hoover Commerical Conquest C1810 Bagged...

1 Answer

Where is reset button on Hoover Wind Tunnel vacuum?


Hello my good friend, this cleaner doesn't have a reset button or anything, it resets by itself after cooling down, it takes about 30 minutes to cools down.

Nov 07, 2009 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

Hoover SteamVac quit working.


there is no reset button to this machine. in some cases if the machine stops or makes a weird noise or a smell like electrical, most likely it's the motor that went out or you could just have a switch that went out. if you didn't have any of these things happen, then take it to your local vac shop to get an est. done to see if would be worthe replacing the broken things or would it be better to buy another machine. hope this help's

Aug 01, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Hoover Wind Tunnel does not turn on


that is a pretty good lifespan for a hoover, but its probably the power switch that's bad. Hoover uses a very poor quality switch. It shouldn't cost to much to have it replaced

Jul 05, 2009 | Kenmore 33721 Upright Vacuum

1 Answer

Hoover savvy will not move


the reset button is in the handle, under the cover for the switch. remove the two screws and pop apart. you need to pull up the little post under the lever switch, and push it back down. hope this works for ya.

Jul 01, 2009 | Hoover U8145-900 Savvy Bagless Upright...

1 Answer

Hoover tempo


sounds like a blockage or belt off in the foot of the vacuum. there is no reset button on this model.

Mar 20, 2009 | Hoover Tempo Widepath Upright Vacuum -...

1 Answer

Does the Hoover Fusion plus vacumn have a reset button


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=628595
Generic problem for all Vacuums
Does the Hoover Fusion plus
Posted by bfranklin on May 28, 2008
Does the Hoover Fusion plus vacuum have a reset button

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.

I did a search on the Hoover Fusion and to the best of my knowledge the Hoover Fusion does not have a reset button and it would be my suggestion is that to call the Hover Factory phone # listed below to see if they can answer your question as I could not find the model # for the item you are requesting. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.

May 28, 2008 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

1,566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...