Question about Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

Planar PDP42BK no picture

I have a planar PDP42BK plasma with a green power light but no picture. Screen is dark. I have looked at capacitors C16, C19 and C97. I have also tested the 2 fuses above the main power switch per other posters suggestion. Both passed. I have the schematic. Any other troubleshooting / repair suggestions?

craig_nehrkorn@yahoo.com

Posted by on

  • Anonymous Dec 06, 2008

    I have the same problem and was wondering if anyone knows where i can buy the chip? I am having a hard time finding it.

  • jclark52 Apr 02, 2009

    My problem is that one of the two fuses on YSUS board was blown. Switch mode was coming on. After replacing fuse, switch mode comes on (still no sound or picture) but shuts down after a few seconds.

×

1 Answer

Check the 15v line that runs through all the boards, left, right and top.. If that has no power, then look on the ysus board (left one) there is a flyback reg (5pin) standard to-220 case surrouded by caps, it does dc to ac conversion, if you dont have the 15v output then the chip is bad. I just did 2 of these that had the same problem.

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 42" plasma has blank


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
  • No video, Power light is on or blinking.
  • TV is making a clicking noise.
  • TV takes a while to come on
  • Screen is very dim or flickers.

Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.



ecollier2012.jpg
Capacitor being replaced! Fairly easy DIY fix.

ecollier2012_0.jpg
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Apr 23, 2011 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

Lost picture. When using main power button, the


Tries unplug,replug the tv an hour later might work.But this a temp.fix,must replaced the backlight video board sooner or later.

Dec 22, 2009 | Planar PDP-42BK 42 in. Plasma HDTV

2 Answers

Tv turns off will turn on then off right away


the internal overload sensor is engaging to protect the system. The parts cost to replace the faulty board is about $70 But you need the skills to open the tv and change it I recommend you get a professional to do it More expensive of course but a lot safer.

Sep 19, 2009 | Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

Planar pdp42bk problem


change the c97,c19 and c16 caps below is where I got mines.
Got it from a site called digi-key.com their phone # is 1800-344-4539. The part #s are EF6225-ND you need 1of these, and E6105-ND you need 2 of these, the cost is $16 for all. Let me know how it went.

Aug 27, 2008 | Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

Planar PDP-42BK 42" Green Light just Flashes no picture.


Email this guy @ exoticimports360@yahoo.com, he has planar parts to sell he might have a power board
or change the c97,c19 and c16 caps below is where I got mines.
Got it from a site called digi-key.com their phone # is 1800-344-4539. The part #s are EF6225-ND you need 1of these and E6105-ND you need 2 of these, the cost is $16 for all. Let me know how it went.

May 15, 2008 | Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

PLANAR PDP-42BK NO VIDEO SIGNAL


who changed the caps and what caps did they change, also there are two switches on the board one should be normal and the other on 30v

May 12, 2008 | Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

TV shutting off by itself


The plasma panels operate on 170VDC and 60VDC, Sound like the 170VDC from the power supply is low or dropping low. You need a tech to look at it, the voltage sources are marked on the board and the adjustment is labeled. Typically a component such as a regulator or capacitor is leaking to cause the voltage to drop.

Al

Feb 03, 2008 | NEC 42VP4 42 in. EDTV-Ready Plasma...

4 Answers

Planar PDP42BK Plasma TV


It is the power supply. Replace the C97, C19, and C16 Capacitors with 2.2 uF ones.

Jul 10, 2007 | Planar PDP-42BK 42 in. Plasma HDTV

1 Answer

Black Screen


Do you still have this tv? and is it fixed.

Nov 28, 2006 | Planar PDP-42BK 42 in. Plasma HDTV

Not finding what you are looking for?
Planar PDP-42BK 42 in. Plasma HDTV Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Planar Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69767 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Planar Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...