Question about Canon Pixma MX360 Printer
How to reset canon pixma mx360 printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Canon pixma mp240 ink reset
Thats funny, cause I took the cartridges out and left the lid up, unplugged it, plugged it back in with my finger on the power button and tapped the stop/reset button twice. Put the cartridges in, pressed the color start, after some moaning a test page printed. I unplugged it again, plugged it back in and I had full ink Levels!!!
Posted on Jan 27, 2010
I found the only tool I have seen at this url. http://www.patronenhandel.de/shop/index.php/cat/c13943_Canon-Chipresetter.html It is a German company, but I was able to order the resetter from them with no problems. It has worked very well, but was a little expensive. part of the problem was that the US dollar and Euro were not at a favorable exchange rate when I ordered. I didn't get any answers to my emails to them, but when I used there site to order, it took about a week to get the device. It is very simple to use.
Posted on Jun 14, 2009
Tips for a great answer:
Mar 29, 2014 | Canon Pixma MX360 Printer
Mar 20, 2013 | Canon Pixma MX360 Printer
Oct 22, 2011 | Canon Pixma MX360 Printer
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels. If the levels are low then the cartridges must be changed.Use only the recommended type.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
Thank you for using FIxya
Sep 09, 2011 | Canon Pixma MX360 Printer
Aug 18, 2011 | Canon Pixma MX360 Printer
1,449 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: