Question about Panasonic BL-C131 Network Camera
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sounds like you may have to go through the original set up again - allocating ports - connecting the ethernet cable to the webcams to allow the router to recognise them etc etc
I suggest you buy the operating manual that is available from the website - Unfortunately its not available electronically.
Posted on Aug 27, 2009
SOURCE: Lost the Setup CD
You will not find any software to do this on the Panasonic website. They only supply instruction manuals and firmware upgrades.However you don't need any installation CD. This camera is a web server so it contains all its own software. All you need is to type in the local network IP address (default is 192.168.0.253) into your Internet Browser and then enter your ID and password into the screen that pops up. The installation CD is just scanning your network to look for a camera on some IP address and it makes things a little easier if you have multiple cameras. All the rest of the setup is actually in the camera's Active-X software. If you previously set the camera up with a different IP address and/or port number and you have forgotten it, or you can't remember your User ID and password, (write it down the next time) you may have to reset the camera (see the small reset switch on the underside of the camera) and you will have to start from scratch. But you don't need the installation CD. The camera will ask you exactly the same questions as the CD. Typically you will have to set it up first in wired mode with an Ethernet cable to your router, but this is only because the camera doesn't know the SSID of your wireless network until you tell it (go to Setup/Wireless when you have logged into the camera.) Once you have put in the required wireless info, you just flick the switch on the underside to Wireless Mode and it should all work just fine.
Posted on Nov 14, 2009
SOURCE: I can not connect to
Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.
C. Windows Live Messenger:
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger:
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud
Posted on Jan 19, 2010
To view over the internet,
1. setup a wifi with internet active.
2. Insert the CD which came with the cam into your laptop which is connected to the wifi as well. Follow instructions. It is simple. If you need help, click here.
3. Make a new DDNS account if you don't have a static public ip (if you don't know what that is, you dont have one).
You are ready to go.
Make more money with your website.
Real Guard to watch your cctv for a dollar.
Posted on Apr 22, 2010
Tips for a great answer:
May 28, 2011 | Panasonic BL-C131 Network Camera
Dec 17, 2010 | Panasonic BL-C131 Network Camera
Apr 05, 2010 | Panasonic BL-C131 Network Camera
Nov 27, 2009 | Panasonic BL-C131 Network Camera
Aug 26, 2009 | Panasonic BL-C131 Network Camera
Aug 25, 2009 | Panasonic BL-C131 Network Camera
May 27, 2009 | Panasonic BL-C131 Network Camera
May 10, 2009 | Panasonic BL-C131 Network Camera
Mar 20, 2009 | Panasonic BL-C131 Network Camera
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: