Question about Lakewood 2210 Fan

1 Answer

How to clean blades on lakewood fan 2210 - Lakewood 2210 Fan

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 168 Answers

Hi, if you look inside the grill from the back side, you will see there are small snaps inside near the edge of the cover. The snaps go around the entire cover and are about 3-4" apart.
I used a flat tip screwdriver to get push the tab up from the back and the inside of the grill. When you push up the tab a bit, then slide a small flat tip screwdriver on the outside lip of the front grill. You will have to do this all the way around until the cover snaps off. Putting it back on is a breeze because it just snaps together.
***AS ALWAYS SAFETY FIRST !! NEVER WORK ON ANY APPLIANCE When it is plugged in !! ***
Hope this helps.... =)

Posted on Mar 15, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Boggsj
  • 20 Answers

SOURCE: Lakewood 200I Floor / Box Fan

Probably requires cleaning- take the grille off, pull the blade free (most pull straight out- some have a pin/socket deal right behind the blades that need to be removed first) and clean out any gunk you may find inside. Be sure to unplug it first. before replacing the blade, turn the shaft with your hands to see how it moves; you might want to grease it with an electricity friendly lube of your choice. If it's still hard to turn, it may just be this fans time; box fans are cheap, and made cheap, and the wear-and-tear adds up.

Posted on May 23, 2007

  • 1 Answer

SOURCE: Lakewood 200I Floor / Box Fan

The fan blade just pulls off. I have a Lakewood 200/1PG and my grills are installed with phillip head screws.

Posted on Jun 03, 2007

bigg t
  • 640 Answers

SOURCE: lakewood floor fan

most likley the set screw that secures the blade to the motor is loose.

Posted on Aug 01, 2007

  • 1 Answer

SOURCE: where can i get a fan blade for the lakewood mc42

nelson appliance

Posted on Aug 17, 2009

blueextc3221
  • 15935 Answers

SOURCE: Lakewood WC 8 floor fan; blades need cleaned. How

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealersip.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clean lakewood 2210 fan


Hi, if you look inside the grill from the back side, you will see there are small snaps inside near the edge of the cover. The snaps go around the entire cover and are about 3-4" apart.
I used a flat tip screwdriver to get push the tab up from the back and the inside of the grill. When you push up the tab a bit, then slide a small flat tip screwdriver on the outside lip of the front grill. You will have to do this all the way around until the cover snaps off. Putting it back on is a breeze because it just snaps together.
***AS ALWAYS SAFETY FIRST !! NEVER WORK ON ANY APPLIANCE When it is plugged in !! ***
Hope this helps.... =) good luck

Jun 28, 2012 | Lakewood 2210 Fan

1 Answer

Lakewood fan 2210 manual


Hi, if you look inside the grill from the back side, you will see there are small snaps inside near the edge of the cover. The snaps go around the entire cover and are about 3-4" apart.
I used a flat tip screwdriver to get push the tab up from the back and the inside of the grill. When you push up the tab a bit, then slide a small flat tip screwdriver on the outside lip of the front grill. You will have to do this all the way around until the cover snaps off. Putting it back on is a breeze because it just snaps together.
***AS ALWAYS SAFETY FIRST !! NEVER WORK ON ANY APPLIANCE When it is plugged in !! ***
Hope this helps.... =) Hopefully you won't need the manual and im pretty sure they won't tell you how to take it apart either.

Jun 19, 2012 | Lakewood 2210 Fan

1 Answer

Lakewood 2210 table fan.. It wont come apart to clean the blades and such.


There are NO Screws holding the front grill on this model.

Hi, if you look inside the grill from the back side, you will see there are small snaps inside near the edge of the cover. The snaps go around the entire cover and are about 3-4" apart.
I used a flat tip screwdriver to get push the tab up from the back and the inside of the grill. When you push up the tab a bit, then slide a small flat tip screwdriver on the outside lip of the front grill. You will have to do this all the way around until the cover snaps off. Putting it back on is a breeze because it just snaps together.
***AS ALWAYS SAFETY FIRST !! NEVER WORK ON ANY APPLIANCE When it is plugged in !! ***
Hope this helps.... =)

Aug 04, 2011 | Lakewood WC-2000 Box Fan

1 Answer

How do I clean the Lakewood Tower Fan LWTF-42/RC-DLX. How can I open it to clean the blades


Open the grills and use a long stem tipped with cloth dipped in kerosene to lightly clean the dust. Then use a similar arrangement of dry cloth wound on it to wipe clean the moist dirt. Repeat the process and you will have a clean blade. Use a jet air blower to assist you , use face mask and do it out in the open.
Helpful ?

Aug 20, 2010 | Lakewood 007 Floor / Box Fan

1 Answer

I do not know how to take this fan apart to clean the blades and apparently the company has gone out of business


lay the fan flat down on the ground and put ur knees on the legs and with both hands pull the blades up from the middle

Jun 16, 2010 | Lakewood WC-2000 Box Fan

2 Answers

Where can i get a fan blade for the lakewood mc42 in fan


have a crack in one of the blades. Where do I get a new fan?

Jun 29, 2009 | Lakewood MC-42 Fan

1 Answer

Lakewood floor fan


most likley the set screw that secures the blade to the motor is loose.

Jun 09, 2007 | Lakewood HV9 Floor / Box Fan

1 Answer

Lakewood 200I Floor / Box Fan


The fan blade just pulls off. I have a Lakewood 200/1PG and my grills are installed with phillip head screws.

May 27, 2007 | Lakewood 200I Floor / Box Fan

2 Answers

Lakewood 200I Floor / Box Fan


Probably requires cleaning- take the grille off, pull the blade free (most pull straight out- some have a pin/socket deal right behind the blades that need to be removed first) and clean out any gunk you may find inside. Be sure to unplug it first. before replacing the blade, turn the shaft with your hands to see how it moves; you might want to grease it with an electricity friendly lube of your choice. If it's still hard to turn, it may just be this fans time; box fans are cheap, and made cheap, and the wear-and-tear adds up.

May 23, 2007 | Lakewood 200I Floor / Box Fan

Not finding what you are looking for?
Lakewood 2210 Fan Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lakewood Dryers Experts

Bruce Showalter

Level 2 Expert

79 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

tfelton3

Level 2 Expert

183 Answers

Are you a Lakewood Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...