Question about Big Button TV Universal Remote
For Sky digital box, Amstad DV3
and Samsung DVD/VCR AK 68
It works for our Daewood TV.
dont know if you have found a sloution yet but in the event that you are still trying here you go:
Press the code search button, then press the button corresponding to the type of device you are trying to program (TV) then press the power button. Now sit back, grab a book and wait. It may be a while. Took mine like 10 minutes. This may not be the best universal remote but it sure is one of the most entertaining, gets a good laugh everytime.
Posted on Jan 16, 2008
I have a solution but it is too much info for this tiny screen they have, and there is no support for photos. So, unfortunetly I have to send you to my photobucket account where I posted scanned pictures of the "Acual Manual" I hope the website doesn't get banned. Here are the five pages you'll need to set up your giant remote:
Posted on Jan 22, 2008
Have a solution for you.Turn your TV on then Press and hold 'P' on remote until light stays on. Press device to be controlled (TV/Cable) light will flicker but stay on. Now keep pressing channel up (up to 300 times) until device changes channel. Then press Enter to save code. Hope this helps
Posted on Jun 21, 2008
Here are the instructions for auto code search from the Omnitech manual:
There is another way to set up your controller, that does not use the brand code lists. You can let your
controller search through all of its available codes automatically in order to set the connection to the
target device. To do this, follow these steps:
1.Turn on the target device.
2.Point the controller at the target device and press and hold the Code Search button for around 3
seconds, until the LED light stays red.
3.Next select the type of device the target unit is by using the Cable/TV/VCR/DVD/Sat Buttons (i.e. if
it is a TV that you are trying to control, press the TV button). The LED light should then blink once,
then stay red.
4.Press the On/Off button on the controller slowly and repeatedly until the device you are trying to
connect with turns off. (Note: the LED light will blink each time you press the On/Off button). When
this happens, press the ENTER button in order to store the code and the LED light will turn off.
Posted on Jul 13, 2008
Tips for a great answer:
Feb 05, 2016 | Universal Remote Controls
Feb 04, 2012 | Universal Remote Control Remote Controls
Sep 23, 2011 | Samsung TV Set Top Box Remote Control
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes
Jul 13, 2011 | One For All URC-3300 Remote Control
Feb 12, 2011 | One For All URC-4021 Remote Control
Nov 28, 2008 | Toshiba Remote Controls
Jan 02, 2008 | Big Button TV Universal Remote
Dec 13, 2007 | Remote Controls
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: