Question about Drills
Relatively new but passed warrenty. rotates, just won't hammer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Bosch 11247 Hammer drill works
Usually replacing the o-rings on the piston, striker and Impact bolt will solve any hammering issues. That is considering there is no damage to the mechanical parts in the hammer mechanism.
Posted on Apr 13, 2009
They are filled with a special grease that comes from Bosch. It sounds like the impact bolt or the striker pin in the unit are not moving the way they should. These are the pieces that work together to create the hitting action. About all that can be done now is the unit has to be dismantled to get those to pieces moving again. Bosch makes what they call service packs for all thier hammers. They have all the o-rings and grease to get your hammer working again. A Bosch service center can supply you with the kit. Ask for P/N 1617000225, or they can take care of it for you.
Hope this helps
Posted on Apr 16, 2009
It sounds like the cord is ok as you have power to the switch. It also sounds like the switch is OK. These units have a governor on them as well. I suspect the governor because you indicated that the hammer will not come up to full speed. Beyond the governor, the only other thing to look at is the motor. You did say that you didn't notice any sparking so the motor sounds like it is OK.
In my opinion from everything you said, its the governor.
Posted on May 01, 2009
If tool hammers brushes still good. Motor runs hammer action.
Take hammer/ drill switch lever off by removing small plastic plug in center with small screw driver.remove indicator handle off by removing #8 torx screw and lightly pry off. There is a pin and spring that lock tool into hammer or drill.Check for broken spring or binding spring and pin.If binding , clean and grease.
Posted on Jul 08, 2009
There is a clutch in the main spur wheel of the unit. These sometime begin to slip, on rare occasions they will slip to the point where the drill will not rotate. If you are interested the part number for this clutch is 1617000817.
Posted on Aug 06, 2009
Tips for a great answer:
Sep 04, 2014 | Bosch Tools & Hardware - Others
May 26, 2013 | Bosch 11241EVS SDS-Max Rotary Hammer
Apr 14, 2013 | Drills
Apr 04, 2013 | Bosch 11247 1916" Spline Combination...
Jan 26, 2013 | Sport & Outdoor - Others
May 28, 2012 | Yamata Sewing Machines
Feb 19, 2012 | Bosch Drills
Feb 15, 2012 | Dewalt Drills
Oct 14, 2017 | Drills
2,083 people viewed this question
Usually answered in minutes!