Question about Bosch Axxis+ WFR 2460 Front Load Washer

1 Answer

Power issue No power to the machine, checked the outlet and there is elictric so the problem is deffinatly the machine. Any suggestions??

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 903 Answers

If you have checked the plug and the fuse in the plug and they are both okay, then is could be the capacitor inside the machine and you will need to call out an engineer to repair it

Posted on Oct 27, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My power outlets have no power. The fuses are good under the hood and inside fuse boxes. Any suggestions?

Year/make/model?? To have two defective power outlets would be uncommon. Suspect a power supply issue ( most common ) to outlets. You may have missed the fuse that supplies these outlets. Supply me with make/model and I will give exact location of fuse that needs to be checked

Dec 06, 2015 | Cars & Trucks

1 Answer

Lancer glx 94 model no elictric power at distributor

Check ignition relay, coil and module.

Jan 20, 2015 | Cars & Trucks

1 Answer

Power won t stay on

1.check outlet to make sure it's ok
2.could be power cord
3.could be connection between power cord and sewing machine
4.could be short in wiring
if it continues, I suggest to have the machine checked

Jan 17, 2014 | Sewing Machines

1 Answer

No power to the stepmill

Start by confirming power at the wall outlet. There should be at least 110v AC at the wall. Also confirm 12v DC output from the power supply where it plugs into the bottom of the machine. If you have power there, I would suggest pulling the side panel and checking the wires just behind the plastic panel, where the power supply plugs into the bottom of the machine. A very common issue with these machines is a simple loose ground wire on the grounding plate. If all of the previous checks provide the correct voltage, continue following power to the relay board and from there to the console. Your problem lies where the power stops. Video about Multimeter Testing

Oct 28, 2013 | Stairmaster Stepmill 7000 Pt

1 Answer

02 elantra electricsl problems

what kind of electric issues are you having also the best thing is to take it in to a shop and have them fix it for you but keep in mind it cost a lot to have elictrical issues fixed you will have to make a choice to sell the car and buy your self a car with out the elictrical issues or spend a few grand to get it fixed

Jan 28, 2013 | Hyundai Cars & Trucks

1 Answer

Interrupted power on my Pfaff sewing machine

Make sure your machine cord secure in the machine. Check your home wall outlet too since you are able to get machine running away from your home. If none of these are the issues, definitely take back for repair. Jimmy

Apr 03, 2012 | Sewing Machines

2 Answers

Need cord

You can visit your local hardware store. Bring with you your old cord. You can also go to the store where you have bought your printer. You need to tell them your printer brand and model number.

Jan 23, 2009 | Lexmark X83 All-In-One InkJet Printer

1 Answer

2001 Hyundai Sonata 4cyl. Air conditioner worked irratically. Serpentine belt broke and was replaced. A/C started working again, then began only blowing cool air at higher speeds. Now does not blow cool...

Check the AC magnetic clutch relay, it may be sticking open. Bypass it (located under the hood) and see if the system cools down, if not you have other problems.

May 12, 2017 | Hyundai Sonata Cars & Trucks

Not finding what you are looking for?
Bosch Axxis+ WFR 2460 Front Load Washer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers


Level 3 Expert

77499 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides