Question about Health & Beauty

Open Question

I need a parts diagram for a Toledo scale model 3111 and calibration instructions.

I need the diagram with parts names, and instructions on how to calibrate it. This is for use in my kitchen and not for commercial use.

Posted by on

  • Andy94538 Feb 23, 2012

    Serial # 1387508-1 Fact # 3111-0212 Cap 6 Lb. This is the only other information Ican find on the scale. I need the diagram with parts names so I know what the factory calls each part. If, on the calibration instructions, it says to adjust the screw on the "thingamagig," I can look on the diagram and see what the factory calls the "thingamagig" and what the part looks like. I don't know what other information I can give you.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: calibration is off

My Weight Watchers digital scales model#ww39 has gone haywire. I put new batteries in it to no avail. You tap it and the numbers come right up then changes to 000.0 as it should, when you step on the scales the numbers flash as they should but either they weight you about 100lbs to heavy or the numbers continue to blink and the LCD goes blank. Can they be fixed? Can I fix them myself at home? Do I need to shoot them? Just throw them out in the yard? Please I need help!!

Posted on Oct 04, 2008

Ad
  • 1 Answer

SOURCE: how to calibrate a taylor scale 5571

The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight,to calibrate, or some other unusual error.

  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department.You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

Posted on Nov 29, 2009

  • 1 Answer

SOURCE: I am looking for a calibration guide for a Triner 1870x-fb

I found a manual that has calibration instructions for this scale.

Posted on Apr 11, 2010

  • 1 Answer

SOURCE: Kitchen scale, Salter, model 2006: change batteries

The 1 part just slides off.

Posted on Jun 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the triple e error code on a Mettler Toledo scale


ive seen this before on my scale (don't know your model number??), seems the cable to the bottom platform was damaged , the guy said it was reading disconnected . ?? he replaced the entire lower part and it worked well again , found out later my temp hit it with a pallet lift , so that's how it got damaged .

Feb 02, 2017 | Mettler Health & Beauty

1 Answer

How do you calibrate a Seca 334 baby scale? I have the weights but need instructions


Being a prior employee at a scale company I will tell you how to calibrate that scale the first thing you need to do is get in contact with the manufacturer once you get in contact with the manufacturer give me the part number when you give them the part number they will give you the book later on how to calibrate the scale

Aug 25, 2015 | Seca Health & Beauty

1 Answer

How to calibrate mgp-1014


There are different digital scales available for the home, or in your business (like your kitchen scale, bathroom scale, weight scale or food scale), but you have to calibrate them first before you can use them. There are different brands of digital scales like Primo and Tanita, and each of these brands has different instructions on how to operate them for calibration.

Infor from: OBD diagnostic tool one stop supplier

Mar 06, 2014 | 760Li Brief instructions f01, f02, f03....

2 Answers

Battery code for Salter kitchen scale Model 6055


i needs manuals of calibration of the scale salter model 6055

Aug 23, 2011 | Salter 2001 electronic kitchen scale

3 Answers

I need calibration instruction for Mettler Toledo IND690 and ID3sTx, please


I WANT TO CALIBRATE METTLER TOLEDO IND - 690.. PLEASE ME..TEACH ME HOW

Oct 21, 2009 | Zebra Printer 140-751-00000

1 Answer

I have an old toledo electronic scale that I need to reset? This is an old electronic scale and it is flashing 0000. The name on the machine is Toledo Sentinel III model 8420


To Whom It May Concern:

I have access to the same model you mention in your post. It was handed to me for repair and I did my best to track down a schematic for Toledo Scale model 8420. Coincidentally I happen to work in the same neighborhood that Mettler-Toledo is located and getting to their CSR was easy. Bad news is this same CSR who is what we in the industry call a "Lifer" didn't have any of the service documentation for this 25+ year-old scale.
Good news is I made a request to the original owner not to throw out the scale once I returned it. If you are interested in buying the scale "as-is" and salvaging the parts needed to solve your reset and 0000 problem, this may be your best opportunity. I don't know as of this writing what the original owner, a restaurateur, will ask for the scale but estimate it won't be much. These scales are industrial strength and this particular one is in great cosmetic condition.
Because I am new to Fixya and don't have the patience to set up an account presently, you will have to post your reply as you did for your initial question. I will check the site in a couple of days to see what has transpired and go from there.

Best regards,

Chris

Oct 19, 2009 | Kitchen Appliances - Others

4 Answers

How to calibrate a Pelouze model 4010 scale with a


when i turn on my 4010.the screen display shows 4010 but thats all it does.any solution.

Jul 08, 2009 | RTO Pelouze Scale With Remote Display -...

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1271 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...