Question about Hoover U5264-930 TurboPower Bagged Upright Vacuum

1 Answer

Does anyone have the replacement belt number for this vacuum?

A friend gave it to me, so I don't have the user manual (if anyone has/knows where I could download for free). I figured out the bag size and the filter. The agitator may need replacing, so that part # would be helpful too.

Any help is always appreciated!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Let me know if this is not the right manual, and I will find the right one for you. Thanks!

http://www.hoover.com/pdfs/manuals/U5046930.pdf

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bissell powersteamer


BISSELL User's Guides can be downloaded at www.bissell.com
On the front page under Customer Service click on User's Guides and enter the model number of your unit.
User Guide will be displayed as a PDF file.

Jul 09, 2010 | Bissell 8806 Powersteamer Upright Vacuum

1 Answer

A friend just gave me a Bissell carpet cleaning machine - but I need instructions on how to use it. My friend could not find the manual. It's model 1640-5. Can you help?


You can download user manuals from the Bissell website. However, if you look through the problems posted on this Fixya site under vacuums, you will see more relating to Bissell than just about any other make (with the possible exception of Dyson). You may then begin to wonder if your friend has really done you a favour...

Sep 29, 2009 | Vacuums

1 Answer

My vacuum belt came off and I do not know how to replace it, it is a #7


Here is link for the users guide for your model. On the right side of page you'll see the "Download Manual" link. Scroll down until you find the belt replacement section. There are instructions for both small and large belt replacement. If you scroll down further, you will see the toll free number to order your belt.
Hope this helps.

http://www.azmanual.com/manual/16363/bissell-proheat-2x-deep-cleaner-manual/

Aug 31, 2009 | Bissell 9200 Upright Vacuum

1 Answer

Replace belt


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=730088
Generic problem for all Vacuums
Replace belt
Posted by pmolloy4 on Jul 01, 2008
Replace belt

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The suggested belt change is every 4 to 6 months if the belt is a flat belt and to store the extra belts in a Ziploc bag in the refrigerator. As far as your question I would need more information about the brand name and model # to instruct you as per the belt change, other wise I don’t know how to instruct you as per the how to install the belt on your particular vacuum cleaner. Or, you can check with your local vacuum cleaner dealer in your area or to contact the manufacturer’s website and or phone #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 01, 2008 | Vacuums

1 Answer

How to I replace the belt on a Bissell Cleanview?


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=708100
Generic problem for all Vacuums
How to I replace the (by 2 users)
Posted by bobklein on Jun 26, 2008
How to I replace the belt on a Bissell Cleanview?
Have the same problem? Click Here X
This Problem has been added to the Share Your Expertise Page under "My Work Queue".
OK
1 Other User Has the Same Problem Comment by cooks22, posted on Jun 26, 2008 The belt on Bissell ProHeat powersteamer is broken, I have a new one, how do I replace it? Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Most of the Bissell’s the belt is changed from the bottom or the top is removed and you service it from the top. There are usually screws, clips or levers to remove the bottom plate or top cover and once that is removed then the belt change. If the belt is a flat belt the recommended belt change is every 4 to 6 months and id it is a geared belt then you would change it once a year for the best cleaning. If you have questions, refer to the owner’s manual in the trouble shooting section, if you don’t have an owner’s manual then you can contact the Bissell Factory cust serv listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.bissell.com/ Customer Service 1-800-237-7691
Hours of Operation Monday thru Friday 8:00 am to 10:00 pm EST
Saturday 9:00 am to 8:00 pm EST Mail To: Headquarters, Bissell Homecare Inc
P.O. Box 3606 Grand Rapids. MI 49501
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 26, 2008 | Vacuums

1 Answer

I need to replace the belt on my vaccum. I lost my manual.


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698951
Generic problem for all Vacuums
I need to replace the
Posted by 4eversofia on Jun 23, 2008
I need to replace the belt on my vacuum. I lost my manual.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. In order to change your belt I would need to know the brand name and the model # in order to give you the correct information to change your belt, so a little bit more information needed as to what you have and then I can direct you in the belt change. Normally there are screws in the bottom of the vacuum and once you remove the screws or clips you can either change it from the bottom or the top cover will lift off and then you can get @ the belt from the top.The average and recommended belt change for a flat belt is every 4 to 6 months and if you have a geared belt it is once a year for the best cleaning. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 23, 2008 | Vacuums

1 Answer

DONT KNOW HOW TO CHANGE MY BELT


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698891
Generic problem for all Vacuums
DONT KNOW HOW TO CHANGE MY BELT
Posted by mommyhop1 on Jun 23, 2008
I LOST MY MANUAL TO SEE HOW TO CHANGE MY BELT. TRYING TO FIND THE USERS MANUAL FOR MY ELECTROLUX 3500 SR

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to get the owner’s manual is to contact the Electrolux factory and either download the owners manual from the website or call the customer service phone # and give them the model and serial # of the machine and they will send you out an owners manual for the product. Or you can contact your local vacuum cleaner dealer in your area and they would assist you in changing your belt. Usually there are screws in the bottom of the vacuum and either the bottom will come off or the top cover will lift off and then you can change the belt. The average and recommended belt change for a flat belt is every 4 to 6 months and if you have a geared belt it is once a year for the best cleaning. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://electrolux.com/ Customer Service 1-800-896-9756
Electrolux Home Care Products – North America
P.O. Box 3900 Peoria, IL 61612
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 23, 2008 | Vacuums

1 Answer

My eureka


The belt may look ok, but am sure it is stretched and when this happens, the brush roll won't turn like it should. Did you check the brush roll ends to see if they turn freely, if not replace it.

Mar 10, 2008 | Vacuums

2 Answers

Brush won't spin


Yes it could be the belt or the "Bearing Assembly". I had the same problem with a vacuum I got from a friend. 1st I replace the belt,but when I turned the vacuum on I could smell something burning and then the belt broke in half. I then realized the brush roller was stuck in place and would not turn even with force applied. I later found out that 1 of the 2 Bearing Assembly's was worn out,when a Bearing Assembly is worn out the brush roller can not spin. So now it looks like I need to buy a whole new brush roller,unless I can find a place that sells the Bearing Assembly for part number 61445-1,which is a roller brush for a GE Wal Mart vacuum.

Dec 08, 2007 | Hoover U6437-900 / U6439-900 Windtunnel...

Not finding what you are looking for?
Hoover U5264-930 TurboPower Bagged Upright Vacuum Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...