Question about Canon imageCLASS D760 All-In-One Laser Printer

1 Answer

Canon D760 I am horizontal smudges and ghost images on my copies. My copier is about 5-6 years old. The glass is clean as so is the inside cover. Thank you so much for your assistance. Gloria

Posted by on

  • gsuarez78245 Oct 26, 2008

    Thank you Joe - and I guess I should have edited my post for grammar! lol - I will keep you posted. I've never changed toners/drum etc. I'm very pleased w/this copier :) Hope it's just the toner cartridge.

    :) gloria

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 628 Answers

You have one off possibly 2 problems.

1. The toner cartridge is defective. Try another and see if the problem goes away.

2. The fuser roller is defective. It has a teflon coating and after a while it either gets encrusted with toner and transfers ghost images or the image doesn't fuse properly.

I would try the first alternative. Let me know if it works for you.

Joe

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Smudged horizontal lines


Try cleaning your rollers, it worked for me. I hope this helps.

Feb 13, 2013 | Canon Pixma MX410 All-In-One Printer

1 Answer

Where is the platen located


The platen is the part that covers the large original glass. That is why this glass is sometimes called the "platen glass". More commonly the glass is called the original glass because that is where you lay the original to be copied if you are not using the feeder.
Thank You for using Fixya.

Jan 10, 2011 | Canon imageCLASS D760 All-In-One Laser...

1 Answer

Large black horizontal stripe on copies from Canon ImageClass D760. Recently had ADF and rollers changed.


Sir,

If you place and orginal on the large glass and may a copy does the strip dissapear? If not it could be cleaning blade drum fuser unit? If the strip does leave then you have a problem with the docfeeder glass small long glass next to the big glass. Clean it!

Feb 26, 2010 | Canon Printers & Copiers

1 Answer

Black smudge mark down 2 inches of right side of copy?


Do you see the same smudge mark if you lay the original on the platen rather than using the document feeder? If it only shows when using the document feeder, clean the scanning glass for the document feeder. It's the small glass to the left of the main glass with the cover open. Use a damp cloth and clean off any dirt or white-out.

Nov 04, 2009 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

Dirty copies on Canon PC1060


First replace drum cartridge

Nov 04, 2009 | Canon PC1061 Copier

1 Answer

Ghost lines horizontally (looks dirty) when making multiple copie


Check the cleaning blade of the OPC drum,the image transfer unit.

Aug 17, 2009 | Canon Printers & Copiers

3 Answers

My old Canon NP1215 Copier: -First copy is


most probably a change of the drum and cleaning blade is needed ,check also the fixing/fuser roller

Jul 11, 2009 | Canon Printers & Copiers

1 Answer

Canon D760 Ghost Text Problem


Check the fuser unit (Film), clean the glass

Jul 07, 2009 | Canon imageCLASS D760 All-In-One Laser...

1 Answer

Gestetner 2722z copier, new drum, new transfer belt, smudges yet


The image is not transferring properly..........

remove and clean all corona wires (thin wires that create the latent image) use a q tip and dip in rubbing alcoholhot

Also make sure the fuser rollers are hot(insert or trick safety switches to determine if the fuser lamps are lighting usually upper and lower

Also check the imaging lamp to be sure it does not have any dark burn marks on it and clean the mirrors and the glass under the coy area

Dec 30, 2008 | Gestetner Printers & Copiers

1 Answer

Won't copy document through feeder.


When you say it won't copy, do you mean that the paper won't move in the feeder or that no copies come out? Do you get any error messages? Try using alcohol on a swab or lint free cloth and clean the feed rollers in the feeder. They sometimes get paper dust on them and they can't pick up the paper. Also make sure that any paper sensors that detect when paper is in the feeder are intact. Occasionally they get stuck or broken. Hope this works.

Sep 22, 2008 | Canon imageCLASS D760 All-In-One Laser...

Not finding what you are looking for?
Canon imageCLASS D760 All-In-One Laser Printer Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...