Question about Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television
Just replaced the lamp and Tv keeps shutting off after few minutes watching tv,have to press on button several times before I can watch with no interuption.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just had my picture go out two weeks ago. I took it to a local tv repair shop. They replaced the thermal fuse. I also had a spare lamp so they also replaced that. I'm not sure if they reset the lamp meter but this is what I found surfing around...try at your own risk. I'm going to try this when I go home tonight.
Press the power button to turn the unit on.
While pressing the Vol-(volume down) button on the projection display,
hold down the PIP button on the remote control at the same time for more
than 5 seconds. When the reset procedure is complete the following message
will appear on the screen. "Lamp time was reset to 0".
Posted on May 28, 2008
Power on the set, listen for afaint buzzing sound as the set tries to fire up. If you do not here it then your lamp driver, or ballast is most likely faulty. Also make sure you have the door and all covers back in place and secure. And make sure you insatlled an orginal panasonic lamp because some generic will not work.
Posted on Jan 09, 2009
I had the same problems that most of you have been having, tv turning on and off, lights flashing in all different colors, having to unplug tv to reset and all of that good stuff. I noticed that most of the time this would happen once the tv would start to heat up, and I could hear the fan working a little harder. Well I am not an electrician but It was very simple to unscrew the lower bottom park of the tv, where the fan and most of the electronics sit, then I used an oxygen tank ( I work for a medical company ) to blow out all the dust in the tv, ( you can olso use the compressed air use for computer, but if grandma or grampa have some O2 laying around, it works really good, LOL. )and was very surpriced to see how dusty it was, then I removed the MAIN FAN ( you only need to remove three screws, however there's a box in fron of it, which you'll have to remove first in order to get to the fan ). this may sound a little complicated, but trust me it is not, once you have taken the fan off, clean it all the way around ( best to use a clean rag, the compressed air was not doing the job.
long story short, once I cleaned the fan and put it all back together. The TV still didn't work LOL, Just kidding, It has been working perfect for a little over a week.
If I can help in any other way, please e-mail me @ email@example.com
hope this helps.
Posted on Feb 19, 2009
if you mean color spots size of a dime or so.
IF it is dust, is good idea asking for and estimate to see if can works.
Posted on Apr 18, 2009
Tips for a great answer:
Dec 26, 2015 | Panasonic Televison & Video
May 02, 2010 | Panasonic PT-50LC14 50" Rear Projection...
Mar 31, 2010 | Panasonic PT-50LC13 50" Rear Projection...
Aug 10, 2009 | Panasonic PT-50LC13 50" Rear Projection...
Dec 21, 2008 | Panasonic PT-43LC14 43" Rear Projection...
Jun 03, 2008 | Panasonic PT-40LC12 40" Rear Projection...
Apr 12, 2008 | Panasonic (ET-LA995) Projector Lamp for...
Jan 11, 2008 | Panasonic PT-61LCX65 61" Rear Projection...
Oct 07, 2016 | Panasonic PT-50LC14 50" Rear Projection...
225 people viewed this question
Usually answered in minutes!