Question about RCA HD52W59 HDTV Projection Television

Open Question

Flyback transformer part No. 259296 for model RCA HD52W59

How do I remove the old wires from this part so I can put the new part in it's place?

Posted by on

5 Suggested Answers

premtech
  • 934 Answers

SOURCE: RCA P52937 Flyback Transformer question

The lead going from the flyback to that other device is a voltage divider or splitter as they're incorrectly referred to... To remove the leads press down firmly, twist and then pull up...
Bill

Posted on Dec 16, 2007

Slinteriors
  • 8617 Answers

SOURCE: flyback 259296

When you remove the rear panel look to the left side of the chassis and you will see the Flyback with the two wires coming out of the top one is a large thick red wire the other is a small wire. You can get a new replacement at the following link under 50.00 which includes free shipping and free support to help you install it by on line instant message with a repair tech.
http://servicemanuals.vstore.ca/

Posted on Jun 18, 2008

ladywinn
  • 5138 Answers

SOURCE: How to remove wires from flyback 259296

they are suppose to twist out.

Posted on Sep 24, 2008

  • 9 Answers

SOURCE: I have a RCA model HD52W59, and am replacing the flyback transformer.

Try pulling the boots back and use a twisting/pulling motion. 

Posted on Nov 01, 2008

  • 1 Answer

SOURCE: what is a good part number for the RCA HD52W59

if # on flyback is 37-BSC310-10301, then rca p/n is 270125

Posted on Nov 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCA HD52W59 flyback transformer


your model uses the 270125 flyback if both wires are red. If one is red and the other black then you have the 259296 flyback.

Mar 21, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

Replacing the flyback


If your model is a HD52W59 the wires are part of the new transformer and have to be changed at the tripler and screen control block

Jan 21, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w59 power button lights up for 10 sec than shuts off


the flyback is 259296 you will also most likely need cP150 you can get replacements with free instalation instructions at the following link.
http://servicemanuals.vstore.ca/

Nov 23, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

I am replacing the flyback transformer


You should post here pictures of old transformer and point out what wire you want to remove, then I can give you an idea what to do as flyback transformer is not in front of me.

Oct 27, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

52" rca projection screen tv


If the light blinks 3 times its most likely the flyback. Your model uses flyback 259296 and you can get a replacement at the following link and they have free online instant messageing with a tech when you replace the flyback so they can take you step by step while you change it. Hers the link its flyback 259296.
http://servicemanuals.vstore.ca/

Aug 09, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Green light blinking 3 times....


If your model number is the D52W20 RCA the 259296 is the flyback that your model uses. They just dont list all the models that the 259296 uses. The 265409 is the same flyback but for GE models the mounting tabs are a little different but they are both the same elctrically but the 259296 is for the ITC222 chassis which is the D52W20. They dont have a link for flyback instructions what they do is sign you up for instant messageing when you order a flyback so they can explain the proceedure while youre doing the repair, as a flyback is simply unsolder the old and solder in the new. It takes only a few minutes to do the job.

Jul 08, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA D52W19 Flyback Transformer Replacment guide


The picture tube can hold a charge.with a jumper connect one end to the ground wire around the picture tub. attach the other end to a screw driver and push it under the red cap on the picture tub. that will discharge it.. Remove the transformer from the board by disordering all connections. Insert the new fly and solder. from the old transformer follow the two leads on the side to the screen board at the picture tube. one at a time connect the new transformer leads to the socket and board. part number for the FBT 259296 $50.39 from www.the parts store

Mar 21, 2008 | Televison & Video

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...