Question about Panasonic AG-EZ30 Mini DV Digital Camcorder

Open Question

Panasonic AG-EZ30 - missing reds after bump

Yikes. Had a Panasonic AG-EZ30 take a bad spill today. Everything is working mechanically, no problems with transport, eject, etc. but it's only recording in greens and blues, reds are MIA. Think I blew a chip. Any chance of repair on this? Ideas about cost of repair or place to get it done? Not sure how old this camcorder is, but I'm estimating a few years, maybe as many as six or seven. Not even sure there's anybody who has parts anymore. Thanks very sincerely for any help! Lisa

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: Panasonic DVD Palmcorder (VDR-D100) 1.5 yrs old will not power up

Nope men... I have Just the same problem... I have a VDR-D105 and suddenly doesn't turn on... i was recording with a full charged battery and suddenly just turn off... forever :S

Posted on Jun 16, 2008

  • 1223 Answers

SOURCE: Camcorder has a green tint to it. It looks green

actually it is CCD failure !

kindly contact panasonic they will do it free of charge i am pretty sure even if u are out of warranty bcoz it is a known problem many are facing just call them they will arrange repairs

see this

go to and go to ur region and call them

Posted on Apr 10, 2009

  • 263 Answers

SOURCE: dove trovo il driver della panasonic ag-ez30

Please write in English and help me to give your answer

Posted on Mar 22, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

My cemera hade aproblum autooff unloadinglock what was the solution

I couldn't under stand the question, I guess that there may be snag in cassette drive mechanism, just look inside the mechanism for any loose or missing part like pinch roller, cassette reel holder, reel guide, inclined post etc, if all visibly ok, then the fault may be in power supply circuitry.

Feb 23, 2016 | Panasonic AG-HVX200 Mini DV Digital...

1 Answer

Panasonic AG-EZ30 motor noise nothing moving

well if it uses a tape mechanism .It will only have 3 motors .LOADING, CAPSTAN and HEADS.If one of these is running without tape ,you should get an error of somekind of your screen .If there is no error from mech then noise is possibly an electrical whine from the LCD panel power supply and or main camera power supply .

Dec 06, 2007 | Panasonic AG-EZ30 Mini DV Digital...

1 Answer

Dew detected / eject detected

This is usually caused by a failed component in the moisture detection circuitry within the camera. This will require disassembling the camera to remove the tape mechanism and then replacing the defective component, reassembly and calibration if necessary. This can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on .

Sep 10, 2011 | Panasonic AG-EZ30 Mini DV Digital...

1 Answer

Dove trovo il driver della panasonic ag-ez30

Please write in English and help me to give your answer

Nov 01, 2010 | Panasonic AG-EZ30 Mini DV Digital...

1 Answer

DVX100A panasonic camera tape mechanism not working

You can open the cassette cover and spray inside the upper left side of mechanism(closer to the back) with contact cleaner spray,because there is a rec inhibit switch.If it's not damaged and just dirty you solve your problem ,but if is damaged it needs replacement.

Jul 26, 2008 | Panasonic AG-DVX100A Mini DV Digital...

1 Answer

Problem with recording

this problem is caused by defective power and record start/stop switches. they are still available from Panasonic.

Jan 21, 2008 | Panasonic AG-DVX100A Mini DV Digital...

1 Answer


most likely cause of this problem is loose or dirty cable connections to the video head or mechanism in the camera. get a tech to disassemble the cam and check the flex cables connecting the main board to the mechanism. same fix is good for AG-DVC10 and AG-DVC15.

Nov 14, 2007 | Panasonic Proline AG-DVC7 Mini DV Digital...

Not finding what you are looking for?
Panasonic AG-EZ30 Mini DV Digital Camcorder Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts


Level 3 Expert

57068 Answers

Lawrence Oravetz

Level 3 Expert

7235 Answers

abdul rauf
abdul rauf

Level 2 Expert

383 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides