Question about Drills
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: parts manual
hi a bit tricky this one as far as i am aware ram no longer exist your best bet might be to try a want it now post on e bay someone somewhere is bound to have one ,even if you carn't get a complete manual you might be able to photocopy the pages you need best of luck silk090
Posted on Jan 14, 2009
There are other manuals/parts lists for that press on the same site.
Good luck with the restoration!
Posted on Jun 27, 2009
I would chuck a good size steel pin, unlock and swivel your table over to the side, clean both the taper and the socket with brake cleaner spray or electrical contact cleaner (or even Fondu Alcohol Fuel will work) to leave no oil film at all on the parts. Also run a stone around on all the male part taper surface to check for invisible burr spots and dents left when it was tossed around during manufacturing. Dry every bit of cleaner out by waiting or blowing with a hair dryer. Then tap it in with a piece of wood against the steel pin bottom. Professional shops can make the taper match so it will transmit 5 HP or more without spinning or falling out, but many workers today just don't get the quality training or buy the measuring tools to be able to do that. My Chineese machine didn't even have the draw bar threaded with the matching thread to lock in the chuck in for it's milling head, so you know they are not a detail oriented outfit. Great Guns and all facing the one way!
Posted on Dec 17, 2011
Tips for a great answer:
Oct 29, 2016 | Drills
Sep 18, 2016 | Drills
Dec 18, 2015 | Drills
Aug 27, 2015 | Delta Drills
Jan 23, 2013 | Delta Woodworking Vintage Delta Dp 220 14"...
Feb 02, 2011 | Craftsman 12" Drill Press (21914)
Jan 09, 2011 | Craftsman 11321371 Drill Press 1512" Part...
Feb 24, 2010 | Dewalt DC930KA Heavy Duty Xrp 14.4V...
Jun 09, 2009 | Drills
211 people viewed this question
Usually answered in minutes!