Question about Intermec EasyCoder PM4i Printer
When ever I try to print, IPL 2.78.1 comes up. Also whenever I try to print a label, I have to reboot the printer.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: mis align printout
hi, its hard to say but.... does it feed ok or skip labels??? if it skips labels, the sensor will need replacement or adjustment, also download the latest drivers, and if your driver or software gives u the option, play around with the magnification settings, also double check length, borders etc, try making the label length setting appear longer , shorter etc. Hope this is of help to you,M,
Posted on Jul 03, 2009
Check to make sure that the printer is set to Thermal Transfer and not Direct Thermal. If the printer is in Direct Thermal, the ribbon take-up does not turn.
If the printer is set to Thermal Transfer then I would suspect a bad Power Supply since the ribbon take-up is driven by the power supply and not off the main board.
Posted on Dec 06, 2010
Tips for a great answer:
Jul 06, 2016 | Intermec EasyCoder PM4i Label Printer
Mar 17, 2015 | Intermec EasyCoder PM4i Printer
Jul 08, 2014 | Intermec EasyCoder PM4i Printer
Oct 20, 2011 | Intermec EasyCoder PM4i Printer
May 26, 2011 | Intermec EasyCoder PM4i Printer
May 12, 2011 | Intermec EasyCoder PM4i Printer
Aug 19, 2010 | Intermec EasyCoder PM4i Printer
Aug 11, 2010 | Intermec EasyCoder PM4i Printer
Oct 26, 2009 | Intermec EasyCoder 3400 Thermal Label...
Feb 12, 2009 | Intermec EasyCoder PM4i Printer
913 people viewed this question
Usually answered in minutes!