Question about Blitzz Technology (BWA611) Router

2 Answers

Wireless Router Hi I have a Blitzz NeWave Base 2 Wireless Router. I lost my installation software when I moved locations. i have tried to install them with the driver off of you guys website and my computer doesnt recognize a .bin file after I unzip it... Is there any way or where I can get the installation software or get that driver to work with my computer. It is plugged in through a cable modem and it will recognize it but it will not let my computer connect to the internet even if I wire it from the router to the computer through the ethernet port. Any help with this situation yall can give me i sure would appreciate it. Thanks, Lee

Posted by on

2 Answers

I found the drivers and never could get it to install right. I seen on this site that if you held the reset button down on the back for 60 seconds it would reset the router, but your computer has to be plugged into while you do it. I did and that fixed my problem.

Posted on Oct 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

Lee,
Find you driver in www.driverguide.com
regards,
evelasco

Posted on Oct 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't have manual or cd


This will show you how to get into the router. Even though these are the steps for port fowarding. You should still be able to set up your router with these instructions:

http://www.portforward.com/english/routers/port_forwarding/Blitzz/BWA611/eJamming_Station.htm

Jun 27, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Lost driver CD during move for Blitzz BWP712


go to driverguide.com and find your driver, the site need free registration
Sergio

Mar 25, 2009 | Blitzz Technology (BWP712) 802.11g/b...

2 Answers

Need to set a password for my blitzz wireless router


Hi,
If you type www.routerlogin.com into the internet url bar, it'll ask you for the password for your router.. Just leave it blank and you can access the router settings menu and change your password in there. Write it down! Also, if you want you can enable WEP or WPA encryption protection for your wifi connection in there too, and it will prompt you to confirm the password.. Write it down!
exit from the browser and it is done.
Hope this helps

Chris (ziraffa)

Jan 05, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Wireless router


The bin file is a firmware for the router and not a driver. That's why your computer couldn't recognize it. What you can try initially is rest the router first. Look for rest button at the back of the router. Hold it down for about 20 seconds then unplug the power for 30 seconds. Unplug the power to the cable modem as well. Wait for 1 minute. Make sure the modem is connected to the Internet/WAN port of the router and your PC is connected to port 1 on the router. Power on the modem first, wait for the lights to go solid. When they are all solid, plug the power to the router, wait for the lights to stop blinking. Check now if you can go online.

If all fails, you need to do a MAC Cloning. Consult the manual on how to do it. Hope that helps!

Oct 26, 2008 | Blitzz Technology (BWA611) Router

1 Answer

Need software


Hello, you will find your driver here:

http://members.driverguide.com/driver/detail.php?driverid=432573

But you have to register on the site (it's free)

Have a great day!
Pablo :-)

Oct 19, 2008 | Blitzz Technology (BWA611) Router

2 Answers

Blitzz


Blitzz is out of business. There are a couple driver sites out there (driverguide.com) who may have software and/or documentation to help you.

Mar 24, 2008 | Blitzz Technology BWA711 Router...

1 Answer

Blitzz super g 108 model bwa711


So I try search with factory thw your wireless new driver for windows vista. Issues you have only 54 g because pc´s has wireless not same 108 super g.

Good luck.

Mar 22, 2008 | Blitzz Technology BWA711 (B3WL000900)...

Not finding what you are looking for?
Blitzz Technology (BWA611) Router Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blitzz Technology Computers & Internet Experts

Justin
Justin

Level 3 Expert

2072 Answers

meteshadow

Level 3 Expert

489 Answers

Will Halftowaite

Level 3 Expert

503 Answers

Are you a Blitzz Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...