Question about Projection Televisions

1 Answer

How to get hitachi C2558TN tv into tuning mode using remote.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hold the menu button in and the installation menu will appear

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The red power light comes on but nothing else works on my hitachi 53FDX01B PROJECTION TV


silly question but have you tried turning it on with the remote. if a tv has been turned off by remote and then power goes, turning it on by the tv switch will put the tv back in stand-by mode and you need to use remote.

just a suggestion.

Dec 13, 2013 | Hitachi 53FDX01B 53" Rear Projection...

1 Answer

Do I need a converter box for a Hitachi 53uwx10ba TV?


Check to see what input the set is on--set in menu to catv or cable and connect with set on three if using a box---if not then auto program for channels.

If set on catv you should with the remote be able to direct enter a channel to see if tuner in set works or hook a dvd etc to a rear input to set to see if it works that way.

Nov 03, 2012 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Can you use a universal remote to do the convergence on a hitachi 50vs69a tv?


No, but almost any hitachi remote will do that--problem is on different remotes different buttons do different things in the digital convergence mode.

Nov 01, 2012 | Hitachi Projection Televisions

1 Answer

Can the convergence on a Hitachi rear projection tv be set with a remote other than the original?


No, but almost any Hitachi remote for their projection sets will work--different Hitachi remotes use different buttons in the DECAM or advanced convergence adjust mode.

Tell me the model number and I am fairly sure I can tell you the part number of the correct remote. These remotes can be purchased new or used on Ebay at fairly low prices 15-30 dollars.

Let me know if you have questions and if this information helped you rate this solution as I do this here for free.

Also, if you have any questions about your Hitachi confirm the actual model number and I will help you.
I am an expert on this brand and own two of their projection sets myself.

SD TECH

Dec 09, 2009 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Change from TV mode to AV mode for a Hitachi C28W4110SN


There should be buttons somewhere on the TV itself to switch input modes. Look around where the power button is located and see if there is a menu button you can access. Then use channel up/down and volume up/down to scroll thru modes to find input

Hope this helps
TankMurdock

Apr 27, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Hitachi T.V. remote CLU3842WL will not change channels.


There are two possibilities: either the channel memory has been lost due to the TV being unplugged for an extended period or the digital tuning system has a defective component. First thing to do is go into the TVs menu system and try to re-scan the channels. You may find that you can change channels after doing this. If its still not changing channel, the digital tuning board will have to replaced.

michtech

Feb 15, 2009 | Hitachi Projection Televisions

1 Answer

Cannot program tv using bell satellite remote


Turn your TV on.
Press and hold the TV mode button until all the other mode buttons light up.
Press the blank POWER button. (If your remote only has one POWER button, press that one)
Press the UP ARROW button repeatedly until your TV turns off.
Press the POUND (#) button to confirm.


Cheers

Feb 01, 2009 | Hitachi 50FX30B 50" Rear Projection...

1 Answer

Hitachi 50sv810 Remote


Hi, sorry I confused things on my first post, I understood now that you need a remote to operate the HR 20 , as TV has his own remote.

If you have original remotes for TV and HR20, you should be able to do the job, and that would be best solution.

If instead you want to use an universal remote, the only way out is using auto programming on universal remote, as HR20 codes are not available.

Auto find or auto programming mode is a feature of all universal remotes, you need to check universal remote manual, and follow the procedure, untill this operates your hr20.

Jan 02, 2009 | Hitachi 50VS810 50" Rear Projection HDTV

1 Answer

How do i tune my tv


Hi there,
Go to the menunusing your remote control.
Then search for auto tune (ensuring that your ariel lead and other boxes etc are connected and switched on) then auto tune and save settings.
You should then be set. I hope this helps, Chris

Nov 09, 2008 | Hitachi Projection Televisions

1 Answer

Have a C2144S Hitachi TV and need to tune the AV channel in. Have lost instructions. Can you help?


depending on the remote you have, look for an [INPUT] button or an [AVX] button, if your remote has a slider switch, make sure it is set to TV first

Jan 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...