Question about Vacuums

Open Question

How to change a belt on eureka 4471 vacume.. - Vacuums

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Vac Belts
  • 701 Answers

SOURCE: I got a Eureka 4471 at a garage sale and I need to

Below I have listed a link for your models manual which has instructions and a link for the belt you need. Hope it helps you!

Owner's Manual

Eureka 4471 Replacement Belt

Posted on Nov 01, 2009

reddevil6
  • 1673 Answers

SOURCE: belt change for eureka capture

There 2 or 3 screw on the top cover to remove, then it comes off. Then you can get to the belt, inspect the brush roll while you have it out, make sure the ends move freely.

Posted on Jun 22, 2008

reddevil6
  • 1673 Answers

SOURCE: My Eureka vacuum model 4471

Check to see if the hose and the dirt inlet by the brush roll is open and not clogged. Also if you haven't replaced the belt in a awhile, it may have stretch to the point that it isn't turning the brush roll under load.

Posted on Aug 10, 2008

Vac Belts
  • 701 Answers

SOURCE: How do I change the belt on Eureka Altima 12 v

Here is a link to the owners manual which has instructions and a link to the belt you need.

Eureka Altima Owner's Guide

Eureka Altima Replacement Belts

Posted on Nov 20, 2009

  • 207 Answers

SOURCE: how do i change the

Turn the unit upside down and remove the screws holding the bottom plate on. After you do that, you will be able to access the belt.

Posted on Jul 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the vacum belt on my eureka mega boss


Turn the unit upside down and remove the screws holding the bottom plate on. After you do that, you will be able to access the belt.

Jul 01, 2011 | Eureka Mega Boss 4460DT Vacuum

1 Answer

Changed belt in my vacum and it is now smoking and i smell burnt rubber


Hi,
Check the brush and make sure that it seated correctly...between pulling on the new belt and getting the brush back into the slots sometimes it will bind up...
You also will now want to put a new belt in now... the belt is toast if it smoked...

heatman101

Sep 01, 2010 | Eureka 4467AV Upright Vacuum

1 Answer

Beater bar not moving. Is there a belt? My mom sucked up a sock and didn't know. So she kept vacumming and then smelled something rubbery burning. And then we found the sock and cleared it. Then the beater...


Hello,
The belt is broken or badly stretched and needs to be replaced. Here is a link to download a manual.
Look for the "Download Manual" on the right side of page. Scroll down towards bottom of page and you'll see how to open it up to change the belt.
Hope this helps.

http://www.azmanual.com/manual/16335/eureka-4700a-maxima-upright-vacuum-manual/

Aug 24, 2009 | Eureka 4700A Maxima Bagless Upright Vacuum

1 Answer

Replacing the belt


remove the two screws from the top of the vacume instead of from the bottom and it will be right inside there.! changeing the vacume belt after that is all very simpl and self expl.

Mar 12, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...

4 Answers

CHANDE BELT


you can find out how to change the belt in the manual here that I included on page 4.

http://www.eureka.com/servlet/FindOwnersGuide

Good Luck And Please Rate FixYa!

Dec 29, 2008 | Eureka Altima Upright Vacuum Model 2996AVS...

1 Answer

My Eureka vacuum model 4471 does not pick up - the bag is new??


Check to see if the hose and the dirt inlet by the brush roll is open and not clogged. Also if you haven't replaced the belt in a awhile, it may have stretch to the point that it isn't turning the brush roll under load.

Aug 10, 2008 | Eureka Vacuums

2 Answers

Belt broke


The belt number is 60957, There should be some screws that you remove from the bottom and the whole bottom nozzle will come apart, then you can change the belt.

Feb 27, 2008 | Eureka Boss SuperLite Bagless Upright...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...