Question about D-Link DIR-600 Router

1 Answer

D-Link DIR 600 connection problems

I have a D-Link DIR 600, which I have set up manually. When I connect it to my PC and connect the modem through it, the status comes up as connected, but neither firefox nor chrome connect. My laptop (macbook) recognises and connects to the network, but will not connect to the internet either. Please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

If this is the case, there is no problem with the router. the problem is with the modem.MAke sure that the cable from the modem goes into the WAN(Internet) port of the router.And also, what kind of internet are you using? is your router set up properly to work with your provider?
Is there any problems when you connect your pc to the modem directly with the cable, or does the problem occur only in the wifi connection?

Posted on Feb 19, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: lost network connection

how to connect you plz say more

Posted on Nov 17, 2007

  • 6 Answers

SOURCE: D Link DIR 615 and Acer notbook not talking

Run the windows wizard to setup a network connection from the control panel. Be sure you have the security type and code if you have security enabled on the wireless router.

BXH_5

Posted on Jun 18, 2008

mashoodh
  • 69 Answers

SOURCE: limited or no connectivity on a laptop

you check your router configuration
your wireless configuration
number o hosts limited

Posted on Feb 25, 2009

  • 1341 Answers

SOURCE: Really unstable Dlink dir-655 router

I would suggest you try to change the channel to a higher one and this solves this problem most of the times...You need to go to your router configuration to do that usually by opening a browser and type 192.168 ... and log in into your router...Hope this helps.

Posted on Jun 25, 2009

SOURCE: D-link dir-615 cannot connect to internt

it could be a problem with your internet connectivity. check with the isp.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my d link dir 600 has no wifi signal


What is colors of lights in your dlink box

skype id : johnwalker800969@gmail.com

May 07, 2014 | D-Link DIR-600L Wireless N 150 Home Cloud...

1 Answer

Can't connect XBOX 360 S to D-Link DIR-600 Router


For instructions on setting up the PS3, Xbox, or Wii, for awireless/Internet connection. please click on this link :-http://fixhomenetwork.com/xbox-play-station-wii.php

Mar 04, 2012 | D-Link DIR-600 Router

1 Answer

I accidentally change my mac address in the router... now i dont have internet connetion..... how can i change it back... w/o accessing in the internet.... please respond...


If you are connecting the router to a cable DSL satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem's power adapter. Shut down your computer.3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the WAN port on the router.4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot.7. Turn on your computer.8. Verify the link lights on the router. The power light, WAN light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct.9. Skip to page 16 to configure your router.Connect to Cable/DSL/Satellite Modem OR

To solve this problem, follow the link below and follow the instructions on the linked page on how to solve this problem. For me to give you instructions here, it would be too long so I set up this link that will take you to solve the problem you're having ftp://ftp.dlink.co.uk/dir_products/dir-600/manual/DIR-600_B2_Manual.pdf

Aug 27, 2011 | D-Link DIR-600 Router

1 Answer

I have d-link DIR600 router. When i am using my ethrnet cable to my pc it is working fine but when i am trying to use it with DIR 600 router it is not even detect internet connection


Most likely the cable modem is currently locked on the MAC address of the PC. Try the following:
  1. Power off the system, the power off the router (Unplug Power connection) and Unplug the Cable Modem power connection.
  2. Wait 3 minutes
  3. Power on the cable modem and let it completely reset.
  4. Power on the Router, making sure the cable modem is connected to the UPLINK port of the Router.
  5. Power on the system, making sure it is connected to any of ports 1 through 4
  6. Normally, this will resolve.
If issue persists, Right click the local area connection and Click REPAIR

Jun 20, 2011 | D-Link DIR-600 Router

1 Answer

I have a DIR-600 router to connect my Cable modem and use wireless connection to connect to the internet. It was all working fine till my modem LAN port got damaged somehow.I have changed the modem and now...


Try following this order before you connect your computer to the router.
power off all your equipment (cable modem & router & your computer's wireless card)
first, power on the cable modem, give it some time to boot up and get an IP from the ISP, say 30 secs.
then, power on the router, again, give it some time to boot and obtain its internet IP from the cable modem
finally, enable wireless on you computer and connect to the router.

if this doesn't solve the problem try resetting the router to factory defaults by pressing the reset button at its back for about 10 seconds with the router powered on.

This your router's manual it may turn handy:
http://global.dlink.com.sg/site_support/DIR-600/Manual/DIR-600_B1_Manual_v2.pdf

good luck

Jun 12, 2011 | D-Link DIR-600 Router

1 Answer

Hello sir, my problem is i can't acces my dir-600.my router is connected to my modem. but i can still use internet. i only want to access the setting to config my wireless setting. please help me...


Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 09, 2011 | D-Link DIR-600 Router

1 Answer

I have a Tata Wimax broadband, i have got a D-Link DIR 600 Router, i have tried so many times to go through both easy setup CD and Manual setups but invain.. i am frustrated!!!! I am able to connect to...


Ok...don't panic....take it all back out thru control panel>add/remove...reset your wimax modem by the little reset hole in the back as this can be an issue sometimes by adding the modem in the incorrect order. You should install everything but the "lan" cord from modem to modem last. A good test is to take the "lan" cord from your winmax modem and plug it right into your pc and you should have internet.

Jan 03, 2011 | D-Link DIR-600 Router

1 Answer

D-Link DIR-600 Router got a new account with att and my dlink wont work. it worked fine untill I had to set up a new account because of a late payment. I tried the install disc but no go all green lights...


Turn off everything and wait for a few minutes and turn on the modem and wait for the lights to be steady then turn on the router and lastly the PC... make sure also that the connection of the modem to the router is correct ( modem should be connected to the WAN/Internet port on the router)

Mar 27, 2010 | D-Link DIR-600 Router

2 Answers

How to install dlink dir 600 router


Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Mar 25, 2010 | Computers & Internet

Not finding what you are looking for?
D-Link DIR-600 Router Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...