Question about Maytag Atlantis MDG6400AW Gas Dryer

1 Answer

Belt How do I get to the belt to replace it? Thanks Dale

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Dale, You might need a flat-tip screw driver, to pry the top up, in the front !!!!! If U R standing in front of the Dryer, The Top Should have Clips on each side in the Front, Pull the Top up in Front, and should Hinge Back, to expose the inside...You should see the Belt coming around the Tub.. I hope this Helps...

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace the belt on my Asko T761 dryer? Do I go in thru the front, the back? Are there instructions on-line for belt replacement?


Hi,

How to install a belt on ASKO dryer
Belt Type: Flat belt with ribs
Installation Notes: Ribs go against drum

4ac4ac1.gif

You could Refer to :-

http://fixitnow.com/wp/2006/05/08/asko-t700-dryer-wheel-drum-and-belt-replacement-instructions/

It would be a Generic one but would help you.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 11, 2010 | Asko T761 Electric Dryer

1 Answer

Fan belt replacement


Pop the top - it is held in place by spring clips. Lift it up ... you should see the belt. If you can lift the belt, it is broken - if you don't see it, it is broken. If you see it and can't move it, you have a different problem.

Broken belt, remove the front panel - be careful of the door wires.

The drum will fall free - remove it. Pay attention to the belt tensioner. It snaps into the floor. The belt goes through the tensioner and around the motor pulley.

Get a replacement at a appliance parts place or from a FixYa.com advertiser.

Thanks for your interest in FixYa.com

Jan 09, 2010 | Dryers

1 Answer

Replacing a belt


Hi, To replace this belt, UNPLUG the dryer. Remover the screws under the lint screen. Insert a flat blade screw driver in the gap between the top panel and the front panel and pry up the top panel.
Now locate the screw inside the front panel in the upper corners. Remove them and the front will lift up and release.
Now you will be able to change the belt. Follow the instrutions included in the belt packadge to thread the belt throught the idler pulley.
You can get the belt from my web site @ www.whirlpoolpartssurplus.com if you would like.
Part# 8066065
Please let me know if I can assist you further.

Thanks
Vic

May 23, 2009 | Whirlpool LER7646J Dryer

1 Answer

Belt replacement on an electrical maytag dryer


hi. thanks for the question. to replace belt . lift up top, remove front panel, slip belt over drum. reinstall front and top, and clean all lint . pull dryer from wall ,remove back panel . motor on right, idler pulley on left, pull belt through idler and to your motor.

May 13, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

REPLACING THE BELT


Hi thanks for the question. to replace the belt. open the door. screws on the inside, under top. remove screws . lift the top. 2 screws on the inside, of front panel. remove. pull front off. now replace the belt. thanks the appliance doc. please rate me. thanks

Oct 05, 2008 | GE DCSR483EA Electric Dryer

1 Answer

Belt needs replaced


hi. thanks for the question. to replace belt . lift up top, remove front panel, slip belt over drum. reinstall front and top, and clean all lint . pull dryer from wall ,remove back panel . motor on right, idler pulley on left, pull belt through idler and to your motor. thanks the appliance doc thanks the appliance doc

Oct 02, 2008 | Dryers

1 Answer

Maytag Dryer


hi thanks for the question the belt has stretched replace the belt thanksthe appliancedoc

Sep 15, 2008 | Maytag SDG4606A Gas Dryer

2 Answers

Amana dryer belt


You will probably have to open it up from the top and/or back. If the belt looks alright (it probably won't, though), check the belt tensioner. Carefully observe how the belt goes on and around the tensioner before replacing.

Oct 06, 2007 | Dryers

Not finding what you are looking for?
Maytag Atlantis MDG6400AW Gas Dryer Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...