Question about Jacuzzi Amiga, Soaking Bathtub with Integral Skirt - T715

Open Question

Jacuzzi bath jets will not turn ON power Ok - Jacuzzi Amiga, Soaking Bathtub with Integral Skirt - T715

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 68 Answers

SOURCE: jacuzzi bath

Many time leaks around pumps are a simple o-ring that needs to be cleaned and/or tightened. If the jets are leaking from the back side then the jet will have to be removed and resealed.


Good Luck, Phil

Posted on Dec 11, 2008

Ad
  • 80 Answers

SOURCE: I know I can take a bath without turning on the

The soapy water will fill all of the jets, tubes and the pump assembly. Will it hurt the tub if the jets are not running? The soap film will build up in the jets, tubes and pump assembly and can possibly cause damage if the tub is run at a later date. Contact the tub manufacture and see if there is a safe bubble bath you can use.

Posted on Aug 28, 2009

carlsbiz
  • 1124 Answers

SOURCE: jets not working in my ten year old jacuzzi bath

Open pannel and look for a reset button on or near the pump motor.. Or it is posible that the pump motor is shot..

Have a great day !

Posted on Nov 11, 2009

PartsCenter
  • 125 Answers

SOURCE: my jacuzzi baths pump makes a noise when i turn it

you have a bad pump. has a bad spot on the motor, that is why it doesn't start. What model number of pump?

Posted on Nov 15, 2009

  • 120 Answers

SOURCE: whirlpool bath won't turn on.

Most of the control buttons on a tub are not electrical. These buttons are connected to an air line that runs to the motor. Sometimes an aggressive button push can literally blow the air line right off of the bottom of the button.
This problem is as easy to fix as it sounds. Find the loose air line and push it back onto the button. You will need to open up your access panel. Bring a flashlight.
Be sure to check the connection at the motor too. Good luck

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What cleaner gets the bad smell and crud out of jacuzzi jets?


Here is a link to a site that sells jetted tub cleaners.

Bath Parts Plus Bath Pump Spa Part Spa Accessories Powered by Network...

Any of these cleaners work very well at removing the smell from a jetted tub and the bacteria in the pipes as well.

Rod
US Parts Center

Mar 15, 2014 | Jacuzzi Home

1 Answer

Can I disconnect one of the jets on my Jacuzzi brand jetted tub, so I can use less water and still have a water level above all the remaining jets?


To disconnect one of the jets to get more water flow to the other jets may not be very practical as you will need to remove the tub and cut the plumbing to the jet in question and cap it off.
The other solution that you may use is you have adjustable jets is to turn the water off by the face of the jet, clockwise.
If your jets are not adjustable then the first solution would be your only option other than purchasing a large horse power bath pump so you would get more water flow.

Rod Kidman

US Parts Center

We locate the "seemingly" impossible...

Ph: 888-521-6183

Fax: 801-417-8027

"Chat Live"

Mar 30, 2013 | Jacuzzi Home

1 Answer

I just bought a home that has a 3 year old white Jacuzzi Cetra H526 000 Whirlpool Jetted tub. It was not well maintained. I need 4 new Thermo Pro Jets, 2 Accu Pro Lumbar Jets, a square grille,and a product...


Jacuzzi Cetra Comfort Bath home page:

http://www.jacuzzi.com/baths/options/models/cetra

Installation and Operating Instructions:

http://www.jacuzzi.com/admin/files/files/4cfd8269-e7b0-4286-9908-7b9743.pdf

For replacement parts your best bet is to you use the on-line dealer locator:

http://www.jacuzzi.com/baths/pages/dealer-locator

or you can shop on-line from one of their authorized retailers; however did not see any of the parts you are looking for at the sites I checked:

http://www.jacuzzi.com/baths/pages/buy-online


Mar 17, 2011 | Jacuzzi Home

2 Answers

I have a marble jet bath tub. is there anyway to cap the jet holes, so it is no longer a jetted bath?


Hello,
You should be able to remove the access panel and just disconnect, and cap the hose that is connected to the pump for the jets and then cap the pump nipple, where the hose connects.

This would likely be easier than trying to locate multiple caps to plug the jet holes in the tub.

I hope this helps you.

Feb 02, 2011 | Jacuzzi - Bathtub - Alcove - Navona -...

1 Answer

I know I can take a bath without turning on the jets. However; does the bath water with soap flow back into the jets? I like bubble baths, If I leave the jets off can I use the bubble bath without having...


The soapy water will fill all of the jets, tubes and the pump assembly. Will it hurt the tub if the jets are not running? The soap film will build up in the jets, tubes and pump assembly and can possibly cause damage if the tub is run at a later date. Contact the tub manufacture and see if there is a safe bubble bath you can use.

Aug 23, 2009 | Jacuzzi - Bathtub - Alcove - Navona -...

1 Answer

My Jacuzzi won't turn off or heat


The heater will only fire if it has water in it. If you just got the house, make sure the gas/electric to the heater is on. Turn off the pump and turn it back on.. See if that works. good luck

Jun 05, 2009 | Whirlpool Jacuzzi Jacuzzi Bath Fuzion EF50...

1 Answer

Whirlpool jacuzzi jets not working properly


im not a great expert in this field but try putting some dish washer tablets in water when running to see if they can clean out anything,about 3/4 tabs

Mar 03, 2009 | Whirlpool Jacuzzi Jacuzzi Bath Fuzion EF50...

1 Answer

Jacuzzi bath


Many time leaks around pumps are a simple o-ring that needs to be cleaned and/or tightened. If the jets are leaking from the back side then the jet will have to be removed and resealed.


Good Luck, Phil

Oct 06, 2008 | Jacuzzi Signa 6 Whirlpool JAC-B540...

Not finding what you are looking for?
Jacuzzi Amiga, Soaking Bathtub with Integral Skirt - T715 Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

Mike

Level 3 Expert

4340 Answers

john h

Level 3 Expert

12173 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...