Question about Sharp AR-M160 Laser Printer

2 Answers

Sharp AR-M160 H4 error code

I am getting H4 error code on Sharp copier AR-M160. I have tried alternating "clear" / "auto/text/photo" buttons as suggested eslewhere but that doesn't seem to clear it.
It looks like I will have to replace the fuson unit. Where do I get one and how do I do that?

HMAP

Posted by on

  • 1 more comment 
  • ccccb Nov 07, 2008

    same question as hmurrays.

  • pmudereri Apr 24, 2009

    My Sharp ar5316 printer copier displays error code h2 or 2h and does not print or copy anymore. Can I get a free repair manual for this printer or for AR-M160/M205?

  • Anonymous May 26, 2009

    displays "4" then "H"

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

Clearing a trouble code on a AR-M160 is a little different than the AR160.

Try "#" "interrupt" "clear" "interupt" "1" "4" "start key"

This should clear the error. Even if you replace the fusion unit you will need this code to clear the error

Posted on Mar 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to clear H5 on sharp copier machine

Posted on Jan 08, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Solution for system error [H4-00] on sharp photocopier machine


Replace the Heat Roller and Enter into Sim mode to clear the Error Code.

Jul 01, 2014 | Sharp AR-M160 Laser Printer

1 Answer

H4 error


H4 00 Heat roller low temperature detection
Press: "Clear", "Interupt", "0", "Interupt", "14", "Start Key"

Feb 26, 2013 | Sharp AR-M160 Laser Printer

1 Answer

Error code H4 appear on display when voltage low in photo copier machine sharp AR-a61


in order press P * C * or # * C *. the machine will go into diagnostics. Then enter the number 14 as if making 14 copies. Then enter 1 and press start. That should reset your machine.
PLEASE let me know if this fixes it.

Aug 19, 2010 | Sharp AR-M160 Black and White Copier

1 Answer

Sharp ar-m160


enter the simulation mode:
"#" key Interrupt key "C" key Interrupt key
press 14 and START key
the copier should restart in most cases.

if not:
There is a problem in the fusing area, bad Thermistor, defective ThermalFuse, defective heating lamp.

Jan 26, 2010 | Sharp AR-M160 Laser Printer

2 Answers

My AR M160 digital imaging copier keeps blinking with 4H showing and I cleared the paper jam, all intact, and now nothing but the blinking 4H. please advise


H4 (and other) Error Reset Code:
Press "clear" "interrupt" "0" "interrupt" in succession and machine will blank off
Using the numeric keypad make the display read "14"
Press the "copy/start" key

Good Luck

Nov 09, 2009 | Sharp AR-M160 Black and White Copier

1 Answer

Error H4


Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out andthe LED Display should go blank. If the lights do not go out, thenrepeat step 3 until they do. It may be necessary to increase ordecrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.
Originally posted by tryit

Dec 04, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

H4 error code


Image Quility can be the "AE" botton in between the lighter and darker adjustment or it can be the text/photo botton. I'm not 100% sure which???? Try both to lock it in....

May 29, 2008 | Sharp AR-M205 Black and White Copier

1 Answer

Printer


Give this a try, 9 times out of 10 it fixes the H4 problem.

> Support & Drivers > WorkCentre XD100 Digital Copier - Laser Printer Support > How To Clear an H4 Code Solution: Perform a Fault Reset 14 bttn_print.gifMake Printable bttn_email.gifEmail this page elem_1_spacer.gif Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Mar 10, 2008 | Sharp AR-M160 Laser Printer

4 Answers

MY SHARP AR5316 DISPLAY H4 WHEN I PUT IT ON


Here is the process

  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.
elem_1_spacer.gif

Dec 11, 2007 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-M160 Laser Printer Logo

Related Topics:

2,107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...