An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: canon smartbase mp360
Waste Ink counter:
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan,Copy,Copy
2) Select TEST MODE.
3) Select  PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning
to the state of 3)), and then press the [ON/OFF]
Kindly rate as Fixya if you found this helpful. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Locate the sponge taht soaks up the ink
wash it in water and washing up liquid
strain it out till dry...ish
1)Printer on, press Additional Functions, Scan, Copy, Scan Now you should be in service mode from there for waste ink tank reset it
2)Select Test mode which is like the last avalabe selection 3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPRON Clear Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
Some user tried the procedure to reset waste ink tanf full on Canon MP 360 and ...Reset Ink Level for Canon MX300 · Reset Counter Canon iP1500 and iP1000 ... tricks-collections.com/waste-ink-tank-full-reset-canon-mp360/
Nearly full means it's still OK to print, maybe 50 or so pages and when it says full it will stop and not let you print any more. The ink absorbers are around $20.00 and you need a shop to replace and reset the counter.
the error is "Waste Ink Tank Full" error This error occurs after a set number of nozzle activations, and it's to protect you from having ink start leaking out of your printer. The waste ink tank is actually a large cotton pad in the bottom of the machine which absorbs the waste ink, and if this pad becomes full, the ink will pool and, like water, seek the path of least resistance, which could be where the case parts connect, and then leaking out onto your desk or carpet... Resetting the Waste Ink Volume Counter 1) Enter SERVICE MODE.--- By pressing Menu Copy Copy Copy Scan 2) Select TEST MODE. 3) Select  PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. hope it works for your model Hope it helps. goodluck pls dont forget to rate this