Hi there,
This is from Page 7 of the manual available on Alpine's site:
http://vault.alpine-usa.com/products/documents/OM_CDA-9884.PDF------------------------------------
Setting the Time
-----------------------------------------------
1. Press and hold
F/SETUP for at least 2 seconds to activate the SETUP selection mode.
2. Turn the
Rotary Encoder to select CLOCK ADJUST,
and then press "magnifying glass"/
ENT3. Turn the
Rotary Encoder to set hour.
4. Press "magnifying glass"/
ENT5. Repeat steps 3 and 4 above to set minute.
6. Press and hold
F/SETUP for at least 2 seconds to return to normal mode.
------------------------
I hope that helps.
×