Question about Projection Televisions

1 Answer

I have a Tevion 32" LCD TV (ALCD3270). When turning the TV on from standby, the standby light flashes blue 10 times and then stays blue but the screen does not come on properly. Menu functions are not available and apart from a dark blue background there is no picture or sound.

Posted by on

  • leccyrob Dec 02, 2008

    I too have the same fault. Am a TV repair technician with some experience of LCD's but have not sorted this one!
    The inverter (power supply to backlights) is working OK and the microcontroller works enough to switch in and out of standby.
    Will come back here if I nut it out.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

There is a firware update available from AWA
fixed my set with the same problem

Posted on Sep 22, 2010

  • Poppa Madison
    Poppa Madison Oct 26, 2011

    I have the same set (ALCD3270) with the same problem. Downloading and installing the firmware update will not fix this problem if the motherboard is faulty. I know because I have tried it. As usual with the importing suppliers retail price of a motherboard at Au$329.00 its price makes a mockery of even bothering to purchase it when the value of the TV at this stage is probably only $300 if it was still working
    normally. The TV Industry has always put this roadblock in front of the average consumer so that they are dissuaded from certain types of repair, and thus driven towards making a new TV purchase. What they have never learned is that the bad taste the consumer gets from this experience all too often drives them into the camp of a competing brand. But then as they all do it and don't give a **** that in the end WE are the ones who end up getting done in the hip pocket while they just keep on flogging to the upcoming generation who are ignorant of their practices and the experiences of their forbears.


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a 32 inch audiovox lcd tv that will not turn on. The power light blinks blue then back to solid red.

do you have the sound?

please try a hard reset. by leaving the unit plugged off from wall power for one night. this may fix the problem some times

thank you

Aug 16, 2008 | Projection Televisions

2 Answers

Problem with Sony Grand Wega TV

This could be due to bad capacitors in the sweep supply, a bad High Voltage block, a bad regulator.

Jul 06, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

I have a 56" samsung rear projection tv that won't turn on. the red standby light is lit and when i push the power i hear two clicks and the green timer light flashes quickly then the green led stays lit...

I suspect you probably have a bad LED assembly. It could be either the red, green or blue that is bad and give you the same symptom. The problem is locating parts for it as it looks like the light engine is no longer available. I would have a technician look at the TV to verify this and what parts are needed for repair.

Nov 03, 2009 | Samsung HL-S5679W 56" HDTV

1 Answer

Sony KDF 60WF655 standby/power light blights 10 times then repeat

This is what I found
You may want to have a Tv repair shop look at this .

Standby light flashes 10X

Symptoms / Customer Description
Standby light flashes 10X
[Primary Symptom Code: 2111 ]


G1 and G2 boards are ok.

Found Q box was causing loss of DTL MODULE 5v.
Replaced Q box to resolve.

Part #

Feb 09, 2009 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...

According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Projection Televisions

1 Answer

I have owned a Sony rear projection TV for a little over two years. Model KP-51HW40. I have two problems. The first problem has been going on for about one year. Most of the time when, it is first turned...

Problem # 2 is a convergence issue. If you can solder, you can repair this yourself. As far as problem #1 goes, count the blinks. The set goes into standby as protection from further damage when a problem is detected. The blink count is an internal diagnostic that indicates the circuit in which the problem was detected. Report back here with the blink count if you can.
I'll look up the convergence IC numbers in the mean time.

Apr 24, 2008 | Projection Televisions

3 Answers

Timer Standby light flashing No pitcher

Model # KP-53HS10
Serial # 9718217
MFG 2000

Plugged in TV. Timer Standby Light just flashes continusly. No Picture and No Sound.

Apr 02, 2008 | Sony KP-51WS500 51" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers


Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides