Question about Refrigerators
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I have a Hygena Built
hi try this
On the refrigerator door jamb, locate a small push-button switch. This component operates the light inside the refrigerator. If the switch is malfunctioning, the light in the unit may stay on, and the heat from the lightbulb can cause cooling trouble in the box.
Step 1: Check the bulb to see if it is burned out. If not, depress the push button on the door switch.
Step 2: If the light stays on, clean the switch with a cloth. Then remove the switch from the jamb. Remove retaining screws hidden by a plastic trim piece, pry the switch out of the jamb with a screwdriver, or pry off the jamb trim to expose the switch. Then test the switch with a VOM set to the RX1 scale
Step 3: Clip one probe of the VOM to each terminal of the switch and press the push button. The meter should read zero. If the needle on the scale moves above zero, replace the switch with a new one of the same type.
Step 4: Connect the new switch the same way the old one was connected.
Posted on Sep 13, 2008
Tips for a great answer:
Apr 07, 2018 | Ovens
Oct 26, 2015 | Refrigerators
Oct 23, 2015 | Refrigerators
Jul 17, 2013 | Freezers
Apr 24, 2011 | Hotpoint Refrigerators
Dec 31, 2010 | Refrigerators
Feb 08, 2010 | Refrigerators
Oct 13, 2009 | Freezers
Nov 27, 2008 | Freezers
Sep 13, 2008 | Refrigerators
186 people viewed this question
Usually answered in minutes!