Question about Electrolux Dryers

1 Answer

How to connect gasline to clothes dryer - Electrolux Dryers

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If your 1/2" gas pipe is at the location, it should be stubbed out with a shutoff valve. the valve could be a 1/2" female pipe thread that your gas flex line will attach to-the flex line should have an adapter to fit the 1/2" female pipe thread, if the valve ia flare fitting the adapter is not used. use thread compound on the pipe threads,not teflon tape when working with gas, but nothing is required on a flare fitting.

Posted on Feb 18, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Clothes not getting clean


dryers only dry.............washers get clothes clean...

cheers

Sep 07, 2014 | Whirlpool Cabrio 7.0 Cu. Ft. Super...

1 Answer

How to install electric clothes dryer ?


http://waterheatertimer.org/How-to-wire-240-volt-outlets.html
Usually there are 3 screws in a row. The cord has 3 wires in a row.
Connect either outside wire to either outside screw. Connect center wire to center screw.
Look at type of plug on cord.
Gene
h

May 11, 2014 | General Electric Clothes Dryer Knob -...

1 Answer

Odor for dryer


I would recommend a Service technician be called. You could have too much pressure coming through the gas valve which is the major concern.
The unit should have safety switches that should shut off the gas if the ignitor is slow to light. The odor could be from cobwebs or a piece of clothing could have rolled through the drum liner and fallen into the workings of the machine. This is a very remote possibility.
Sometimes the plastic parts in bras can work loose and slip past the holes in the drum and onto the burner beneath the drum.
Remember that you are hooked up to a gasline, so do not try to pull the unit away from the wall.

Jan 30, 2012 | GE Dryers

1 Answer

We just bought an older house with a jenn air cook top but the pilots are out. How do we light them?


First, you need to look below the cooktop to find the gasline. There is supposed to be a shutoff valve on this gasline. Turn the handle so it is parallel with the gasline (perpendicular is closed) to open it. Before lighting anything, smell around high and low around the cooktop and make sure you do not smell any gas. You can also spray soapy water on all the gasline fittings to detect leaks by looking for bubbles that form. If all is safe, using a long butane lighter, light the pilots for the cooktop. There should be 1 pilot for every 2 burners. You will probably have to remove the grates and metal spill covers to light the pilots. The pilot should be approx 3/8" tall or less. Test each burner individually to make sure they light off the pilot. If they do not, you may need to clean the vertical holes on the side of the burner (where the lighting tunnel connects) by poking them clean with a needle. If the horizontal burner holes are clogged, clean them as well. If there is also a built-in wall gas oven, be sure to light that pilot on that as well. Good luck. Douglas

Sep 28, 2010 | Jenn-Air 36 in. CCGP2720P Gas Cooktop

1 Answer

How do you get into the dryer to change the natural gas connector to a propane connection?


Not sure what country you are in, so I am unsure that the same conditions apply.

The gasline from the meter must be interrupted. Propane bottles connection pipe can then be brazed to the copper line . By law a propane regulator must be fitted between the bottle and the gqas line going to the dryer.

This must be fitted by a licensed gas fitter ( plumber) so if any problems occur your insurance will pay out on fire or other faults.

Placing the propane bottle line directly to the dryer without a regulator and inside a building is dangerous and unlawful, as most dryers are not vented correctly to deal with propane.

Please rate my help++++Thanks for using FIXYA

May 28, 2010 | LG DLE5955 Dryer

1 Answer

How to replace a craftsman weedeater gasline?


you hook one line to it the return line inside the tank

The line you used as a return line pull it back thru the gas cap hole and put that piece on one end of that line and pull it back in the tank until it stops and then hook the return line back where it belongs

May 14, 2010 | Craftsman Garden

1 Answer

Drum won't turn


Your dryer uses a belt wound around a spring loaded pulley and, around the middle of the drum and, around the motor pulley to turn the drum. If you feel capable of fixing ths yourself: Unplug the dryer, if it is gas or, electric. if it is gas: shut off the gas line to the dryer then remove the gasline; next pull the dryer out from the wall and, remove the back panel. Once you do this you will see that the belt has fallen off both the motor pulley and, the spring tension pulley. put the belt back on so that the belt is tight around the drum and, the drum will turn again.

Apr 05, 2010 | Whirlpool LER4634J Electric Dryer

1 Answer

It fires and then goes out after a little bit and then wonk fire again


That can happen if there is air in the gasline, which could be if the gasline(s) were recently installed or replaced, or if the dryer was just installed. If that is the case, it should purge itself after a few more attempts. If not the case, and the dryer has been working fine until now, then there's a problem within the dryer. Improper servicing of the burner assembly can pose an explosion hazard. You should consult a servicer to do the repairs.

Feb 03, 2010 | Maytag Neptune MDG9700A Gas Dryer

1 Answer

Dryer won't dry


Remove the rear connecting vent and try it again.
If it dries correctly...and it probably will. , clen the connecting vent and the vent in the wall.

Mar 27, 2009 | KitchenAid Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

John

Level 2 Expert

125 Answers

Are you an Electrolux Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...