Canon 580 EXII turns off slowly

If it have't turned on, how do you know that battery is charged? Maybe battery too low and has no power to turn on your device.

Get an electronic tester and check the output of you battery

You need to set the flash to slave and the same channel as the master. If the flash doesn't have this function it may be able to be fired optically. Set the master flash to low power and set the off camera flash to optical.

The Canon PowerShot A580 uses two standard AA batteries. You may use disposables or rechargeables, though if the latter then they must be charged outside the camera using a separate charger.

You may download the manual and more from http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a580#BrochuresAndManuals

Hi,
There are many reasons for a dehumidifier to not work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrong with their dehumidifier.

Dehumidifier is running but no water is in bucket
http://www.fixya.com/support/r4662409-dehumidifier_running_but_no_water_in

heatman101

No and no, the flash is by default programed to shut off after 1 minute .If you were using the flash on-camera, the flash would automatically power itself on when camera activity is detected but when the flash is detached, it doesn't wake back up.
To change this you have to turn off the auto shut off in the flash menu:
1. Power the flash on
2. Hold down the back light /C.Fn button until "Fn 00 0" appears on the screen
3. Rotate the selector wheel until you see "Fn 01 0"
4. Press your selector button down so that the 0 begins flashing
5. Rotate your selector wheel to change the 0 to a 1
6. Rotate the selector to the "Fn 14 0" position and set it to 1
7. Press your selector button to save this parameter
8. Press your Mode button to return to the main screen
Now your flash stays on as long as the flash switch is turned on ON, and as long as you have juice in the batteries.

Do not forget to turn off the flash after you are done.You can reverse it anytime, but you have to read the manual for that..

Same setup can be found in the manual

Turn off the Pre-flash from the camera /or 580EX 2.

[email protected]

Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution

rrrrrr17

I recommend finding a higher power battery, Like a Energizer Lithium.

check Custom Functions of Camera and Flash it can be turned off in both locations

After 12 months use camera batteries will not hold a true charge, but they can still be used for clocks, or remotes. Buy new ones. We all have the same problem.