a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the microphone might not need usb drivers to work click start control panel sounds and audio
devices select advanced there might be a tick in the mute box untick it or
select audio from the microphone drop down list make sure you have the right
one selected and in the volume box make sure the microphone box has a tick in
it or select the voice tab and make sure that you have the right media selected
also select volume make sure the box for microphone has a tick in it hope this helps
These are the possible causes why your mic doesn't work:
1. If it is not connected properly 2. Some issues with the microphone 3. The sound drivers are not set up properly.
These are the possible remedies for the above mentioned causes:
1. Try to check if the mic is connected properly. If it was improperly connected, it won't work at all. 2. Some microphone requires battery so try to check this out. Older versions of microphones do not work with the new ones. 3. Set up the sound card properly.
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in ithope this helps
The Microphone might not be working, as it may not be enabled.
However, you may enable the Microphone manually by performing the below steps:
For Windows XP:
1) Double-click on the Volume Control. 2) Select the "Properties" option from the "Options" menu. 3) Select the "Recording" option in the "Adjust volume for" section. 4) Click the OK button. 5) Check the box labeled "Select" under the microphone volume and you should now be able to adjust the volume for the microphone.
For Windows Vista:
1) Right click Speaker near Clock - Recording Devices - right click in box - check 2) Show Disconnected Devices and Show Disabled Devices - check your mic - highlight them and then on lower right properties. 3) Make sure the proper one is enabled and check other settings - on Levels tab make sure MUTE is unchecked and APPLY / OK changes. For Windows 7: 1) Right click on the volume icon in the system tray and then click “Recording devices”.2) Right click on the blank place in the popped up window and then select “Show Disabled Devices” and “Show Disconnected Devices”.3) Right click on Microphone and then click “Enable”.4) Highlight the microphone and then choose “Set as Default Device”.5) Click Apply.6) Select Microphone and click on Properties.7) Click on Levels tab. The default Microphone Boost is set to 0, increase it. Hope this helps.
1. Right click the sound icon in the system tray 2. Click "Adjust audio properties" 3. Go to the "Voice" tab at the top 4. Ensure that a device is selected for the section "Voice Recording"--ensure the appropriate device is seleted--most likely ti will just be one option --make sure it is selected
in order to hear sound on the microphone you need to check the Mixer settings as the default setting for microphone (for playback) is mute as you would get some horrible feedback..
double click on the speaker icon in the bottom left and chose properties from the options menu you may (or may not) have the option to select microphone for playback, however there should be a setting for recording which should give you a slider to set the recording levels for the microphone, use sound recorder or other recording software to test microphone is working
You may not have a choice. The jack could be loose or have a bad solder joint. If the microphone is "staticky" on this system but not on another, then increasing the volume will only increase the static.
You can try a condenser microphone. Condensers require their own power (battery) and output a MUCH higher signal. High enough for the Line-In jack.
If you are using the microphone for voice chat or internet phone or gaming or similar, I STRONGLY suggest a USB headset, such as you can get from Logitech. You wouldn't believe the quality difference.
Go to start then control pannel then sounds and audio devices. Then in in the volume tab select advanced in the device volume section. When the mixer comes up go to options then properties select the recording option a recording mixer will come up make sure to check the microphone box. Raise the level in the ixer and you should be golden. If you want to hear the mic select playback mixer and raise the mic level. Hope this helps. : ]