Question about Zodiac Pool & Spa

Open Question

Baracuda g3 keeps flipping over

Keeps flipping over

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 990 Answers

SOURCE: Open Main Body Baracuda G3

You don't take apart the main body. You just have to remove the flower seal then you have to pry the old one off and grunt and strain till you get the new one on then replace the flower seal. If you bought this at a pool store you should be able to take the head to them and have them do it for you. If you bought it there they probally won't charge you and if you want to do it in the future then you can see it done once. Good luck.

Posted on Jan 28, 2010

jharwell668
  • 640 Answers

SOURCE: Baracuda G3

Check your pool cleaners hose to make sure that it is not becoming tangled. Storing the hose in a coiled position will cause this. If it is not moving and it is not the hose, you could have a leak in a connection somewhere. If the cleaner is getting adequate suction, it should be moving. Try adjust the hose weights to make sure the cleaner is at a 45 degree angle to the pools floor.

Posted on Apr 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Barracuda G3 manual


http://www.zodiacpoolsystems.com/Products/Cleaners/Suction/Zodiac-G3.aspx

Bottom of the page labeled downloads

Apr 08, 2013 | Zodiac Baracuda Zippy Pool Cleaner

1 Answer

How to put on the pressure regulator


Here is a copy of the users manual for the G3 pool cleaners from the Zodiac website. Any set up and installation instructions that you need should be in the manual.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 08, 2011 | Zodiac Baracuda G3 Automatic In Ground...

2 Answers

Baracuda G3


Check your pool cleaners hose to make sure that it is not becoming tangled. Storing the hose in a coiled position will cause this. If it is not moving and it is not the hose, you could have a leak in a connection somewhere. If the cleaner is getting adequate suction, it should be moving. Try adjust the hose weights to make sure the cleaner is at a 45 degree angle to the pools floor.

Jul 06, 2010 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

No movement with my g3 baracuda


A small rip or tear in the diaphragm will cause that problem. When you put your hand over the mouth you are creating more suction to the diaphragm. Replace diaphragm.

Mar 01, 2010 | Zodiac Baracuda G3 Automatic In Ground...

2 Answers

My baracuda G3 stop working is not pulsating and therefore not moving. I checked the suction and the hoses even the diaphram everything looks ok.


If you have suction at the bottom of the cleaner, there has to be a problem with the diaphragm. I would remove it and recheck.

Feb 01, 2010 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

My baracuda is pulsating and moving but surfaces


The control should be below the water, and if you cut the suction down that should help with the cleaner.

Dec 22, 2009 | Zodiac BARRACUDA G3 IN-GRND CLEANER

1 Answer

Flips over


There is a float in the body of the cleaner that keeps it upright. Uour pool store will have this and can change it for you also.

Aug 02, 2009 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

Baracuda G3 zodiac Clings to bottom or sides moving slowly


here is a link to the Technical Support at Baracuda. this should be able to solve your problems. initially sounds like maybe too much suction.

Feb 25, 2009 | Zodiac BARRACUDA G3 IN-GRND CLEANER

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

john h

Level 3 Expert

11001 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...