I cant print photos in my canon ip1880 because if i print a nozzle check, the colors are not printed well. i've already did cleaning and deep cleaning several times but the result is still the same. please help me with this problem..thnx..by the way, im using ciss
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Waste ink absorberfull
or platen waste inkabsorber fullPressing the OK button
will clean the error, andenable to print.In repair,
<Replacement of Inkabsorber kit<Replacement of Platenwaste ink absorberWasteinkabsorber fullwarning (service callerror) may appear.
First of all to make your ink last longer you need to be using the Canon PG-40 and CL-41 instead of the Canon PG-30 and CL-31. The 40's are the higher capacity versions of the 30's. If you mean to ask why your color cartridge is going empty when you don't print much color, it is because when you print in black and white your printer mixes in some color with the black. There is no way to stop your printer from mixing color ink with the black.
go into your printers folder from the start menu on your computer. right click on your printer folder and select printer preferences. Under the page setup tab you can select the paper size and type of printing you want. if you select the card type you should be able to print business cards
This step is a "reset" step for the Canon CLI8
cartridges. The original Canon CLI8 cartridges have a memory chip on
the back of the cartridge, which sends a signal to the printer when the
cartridge is empty. Your printer won't be able to determine how much
ink is in the compatible cartridges, but you can easily monitor the ink
level by noticing the ink level drop in the cartridge as you print (the
cartridges are see-through), or by noticing low ink output on the
printed pages when you run out of ink. The "reset" procedure below is
the best procedure we know of to date to allow your printer to use
Uni-Kit cartridges which offer a tremendous savings over the Original
With the original chip now
attached to the compatible cartridge (you may need double sided tape to
get the chip to stick well to the cartridge), and with the cartridge
now in the printer, Press and hold the Reset/OK Button for 5 seconds to
reset the chips.
The "Ink Low" dialog box will pop up (similar to photo 1 below)
Continue to print until the "ink has run out" dialog box pops up (similar to photo 2 Below) Click "OK" to continue to print.
The "Ink Low" dialog box may reappear, if so repeat the first 2 steps
Then the "once empty" dialog box will pop up (similar to photo 3 Below) Click "Yes" to continue to print
The "Not Liable" dialog box will pop up (similar to photo 4 below). Click "Yes" to continue to print
to print until the "remaining level of ink" dialog box pops up (similar
to photo 5 Below) Click "OK" to continue to print
dialog box will pop up with the "press and hold the Resume" or "press
and hold the Paper Feed" button (similar to photo 6). Press and hold
the "STOP/RESET" button (for Canon MP Series) or "PAPER FEED" button
(for Canon IP Series) for 5 seconds. DO NOT Click "Back" or "Cancel Printing"
"Ink Monitor" dialog box will appear and the printer will continue to
print. (similar to photo 7) In the event that that the "press and hold
the Resume " dialog box pops up again, Press and hold the Paper Feed
Button or Stop/Reset Button for 5 seconds