Question about Proscan PS36800HR 36" TV

1 Answer

Proscan PS36800HR 36" Replacement Power Cord

Hi, I received a Proscan PS36800HR 36" TV from a friend who found it left for trash. We'd like to see whats wrong with it, but there is no power cord. Do you know where I can find just the replacement power cord? Thanks so much!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 275 Answers
Re: Proscan PS36800HR 36" Replacement Power Cord - Proscan PS36800HR 36" TV Standard (CRT) Televisions

Try radio Shack!

Posted on Aug 18, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

No sound but their is picture

Check its speaker/s. If found OK, check and replace damaged component/s at its audio output section circuit. To get some details, Pull up older posts.

Dec 03, 2013 | Proscan PS36800HR 36" TV

1 Answer

Looking to buy part # R45876221-2 for my Proscan PS36800HR any ideas whare to get this part?

What is the name of part you want. Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help
Sometimes, the ads by the side of posts, might help you to order it.

May 24, 2012 | Proscan PS36800HR 36" TV

1 Answer

36" proscan fuse size, type, and location?

Follow the power cord into the set---fuse is glass and plugs into a holder. Typical fuse for this type of set is GMA 5 amp--it will usually be marked on the label inside and stamped into the metal ends of the glass fuse.

If this helped you rate this solution as very helpful as I do this here for free.


Aug 18, 2010 | Proscan PS36800HR 36" TV

1 Answer

Proscan PS36700

sounds like the blue drive is gone..if so this will have to be taken to a repair shop.

Sep 09, 2008 | Proscan PS36800HR 36" TV

1 Answer


I got an old (1995) 36" proscan without a manual, and it's been a pain to get it working. Nice enough TV once you do, though.

The weirdest thing is that S-video shows on channel 91, and the AutoProgram function won't find it. That's right; they just randomly picked 91, and you're stuck with it.

Pressing Menu on the front brings up the menu. Pressing it again cycles through choices, and the plus and minus buttons to the left of it activate the choices.

Good luck finding any more info; hope this helps

Sep 04, 2008 | Proscan PS36500 36" TV

1 Answer



the ticking sound is coming out from the flyback that is high voltages!!! if you on the unit is there a picture coming out? or sounds coming out from speaker?


Jul 02, 2008 | Standard (CRT) Televisions

2 Answers

No Audio, picture fine

this is a very common problem just unplug tv for 5 minutes it
should fix it . simple fix most of the time with rca and proscan.
If that does not do it go into menu scroll down to audio and then press on .

thanks doctor video leading edge electronics

Apr 28, 2008 | Proscan PS36800HR 36" TV

1 Answer

Sharp and a ToshibaTV

First thing to check on both of them if you have the proper equipment would be the regulator IC's if No voltage there check the standby Power supply

Sep 15, 2006 | Proscan PS36800HR 36" TV

2 Answers

All red picture now.

Sounds like a bad capacitor or drive signal on the red tube. Could be the red drive transistor, or a cold solder connection on the crt board

Aug 07, 2006 | Proscan PS36800HR 36" TV

1 Answer

TV works fine for about 1hour.....then the picture

You have a problem in the Hi voltage or horizontal drive circuit most likly. Its a slight possiblity that the video is going out because of a cold solder connection from the flyback transformer blanking pulse to the video/sync separator circuit as it does and has happened in the past. This set should only be serviced by a trained service person as there are no real user serviceable parts inside this set. Good Luck

Jun 16, 2006 | Proscan PS36800HR 36" TV

Not finding what you are looking for?
Proscan PS36800HR 36" TV Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Proscan Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides