Question about Dynamic MX91 Handheld Blender

Open Question

Disassemble mx91 how does one remove the shaft to access lower bearings?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: dynamic mx91. noisy.

dynamic mx91, motor runs but blade doesn't spin, how do i disassemble the blade & shaft?

Posted on Jul 10, 2009

Treefrog15
  • 127 Answers

SOURCE: Mx91 Dynamic Blender Bearing failure

Since the blender costs over $600, yes.

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix nut holding the upper shaft bearing from loosening up again, on Artisan blender


Is it a Kitchen Aid KSM150 mixer as in the subject or a blender as in the body or neither? I'm struggling to visualize a nut holding an upper shaft bearing in either one.

Jul 08, 2014 | KitchenAid 5qt. Empire Red Artisan Stand...

1 Answer

Need to know how to remove shaft and blade from lower bell assy as the blade is bent and bearing is bad excessive play in shaft


There is an exploded diagram here which should show how it dismantles
http://parts.robotcoupe.net/mp450.html
Not sure where you are geographically but hope that helps.
You can buy the bearings, I  was going to suggest that it wasn't worth repairing and then I checked the price of a new one!!!!  It is worth repairing I can't believe how expensive they are! Good Luck

Jan 12, 2011 | Robot Coupe MP450 Handheld Blender

2 Answers

I am trying to get a set of motor brushes for an mx 91 stick blender i am being quoted 40 quids but american sites say 12 dollars why


do you have an automotive generator shop in your area?
or auto electric repair.

my experience is that the people that own and work in their own shops are very knowledgable about motors and will sell you some compatible brushes, cheap.

just a warning. once I replaced the brushes in a wet vacuum and they were used up immediately! I guess the rotor was bad and the problem that ate the old brushes did the same thing to the new.

Feb 02, 2010 | Dynamic MX91 Handheld Blender

2 Answers

Dynamic mx91. noisy.


dynamic mx91, motor runs but blade doesn't spin, how do i disassemble the blade & shaft?

Feb 08, 2009 | Dynamic MX91 Handheld Blender

1 Answer

I need a new motor for my mx91 blender, wher cN I GET 1?


You can order direct from Novon http://www.novon.com/dynamic_mixer_mx91_schematic.html

Most companies that deal with commercial restaurant equipment parts and service will also stock parts for this blender.

Aug 10, 2008 | Dynamic MX91 Handheld Blender

1 Answer

Mx91 Dynamic Blender Bearing failure


Since the blender costs over $600, yes.

Dec 05, 2007 | Dynamic MX91 Handheld Blender

2 Answers

Broken gear on BFP-703 base


The drive is replacable and available from Cuisinart, you will have to sign a waver to get the part. the drive is screwed onto the motor shaft with reverse threads. the plastic drive will have to be completely broken off of the unit to expose a brass"nut" which was internal to the drive. depending upon your model you may have to remove the lower half of the base unit to access the lower part of the motor shaft. there will be a slot in the end of the shaft for a large flat blade screwdriver. this is used to hold the shaft still while turning the drive "nut" with a vice grip pliar or similar. the new drive is just threaded onto the shaft and normal operation tightens it.

Feb 14, 2007 | Cuisinart BFP-703 Blender

Not finding what you are looking for?
Dynamic MX91 Handheld Blender Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynamic Blenders Experts

eyecam

Level 2 Expert

87 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Ross Keen

Level 3 Expert

1231 Answers

Are you a Dynamic Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...