Question about Panasonic Televison & Video

1 Answer

We had apower failure. when the power came back on the HDTV (32 inch) approx 4years old (CT-32HXC14) does not come on. the red light blinks,but the power button does not work. when i unplug the tv and replu, the power button is pushed and it sounds like the tv is goin gto come on and then it cuts out and red light blinks again.

Posted by on

  • joea6and1 Oct 25, 2008

    wasn't told how to get the power board checked....can I take it out like on a computer or do I have to take TV to repair place?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 13,433 Answers

Possibly a power surge has blown out a fuse or two, I would have the power board checked.

Posted on Oct 25, 2008

  • Ekse Oct 25, 2008

    First check if your tv is covered by warranty, if its not covered by warranty. Then you could get your hands on a repair manual if you have experience in electronics you could try to attempt the repair yourself but if your unsure about electronics or if your unfimiliar with a fuse it would be best you contact a local repair man, theres a repair service locator for USA on the right ->

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The power light is red and the lamp light is continuously blinking red


you have a power supply problem. The red lights indicates a power source failure. Probably a chip failure that is drawing too much power... needs a good tech guy to isolate the problem...

Sep 09, 2012 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Tv has no picture or sound. replaced bulb no help greenlight blinks 79 times. red lights start blinking


Lamp light flashing once every 5 seconds or twice every 5? Twice every 5 seconds,....lamp failure, once every 5 seconds,...ballast or thermal fuse failure. You have a lamp, ballast or thermal fuse problem. The ballasts are a discontinued part and can only be purchased used at approx. $225.00 or rebuilt for around $175.00 less any service charges to diagnois and repair.

Jan 17, 2010 | Panasonic PT-50LC13 50" Rear Projection...

3 Answers

The Power Light is Red


yeah, should stay red when unit is turned off, indicating there's power but it's doing nothing.

Per user manual:
Solid red - power off (standby mode)
blinking red - power off (now cooling)
blinking green - power on (preparing to light lamp)
solid green - power on

Mar 08, 2009 | Panasonic PT-40LC12 40" Rear Projection...

1 Answer

Tv goes off then red blinking light comes on


Hello it is the bulb the bulb's on the Rear projection tv are ****. Buy  new tv cause it costs alot to have these tv fixed.

Jan 10, 2009 | Sony KP-46WT500 46" Rear Projection...

2 Answers

STATUS LIGHT SOLID RED ON 73 DLP MITSU MODEL WD73735


The colorwheel is your problem. To confirm this, unplug the tv, then listen thru the air vents in the back as you plug the tv in. You will probably hear a ticking sound. If you do, that is the colrwheel. If the colrwheel is working, youwill be able to hear it "spin up". It will be a sudden high pitch whine. Let me know if I can be of further assistance

Dec 19, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Red stand by light blinking


5 blinks = lamp driver (ballast) failure.

1-468-798-14 for the 610 model

replacement is done from the back of the set, should be straight forward, keep the red ballast wires apart for best results

if a tech replaced the red tube, you have an older tv where 5 blinks is the AKB error meaning your CRTs are getting old.

Nov 17, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

3 Answers

Toshiba dlp 46 inch red light keeps blinking


42 inch Toshiba DLP. Was watching a movie and the screen went dark. The red light started to flash and kept flashing. any ideas 

Jun 26, 2008 | Toshiba 46H84 46" Rear Projection...

1 Answer

Power Failure, now the power/timer blinking light won't stop blinking


Four bad caps in DM module = common repair for qualified
Mits tech.................................T.

Nov 03, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...