Question about Rio Go Video DDV9300 VCR

1 Answer

Need a new remote control for Rio Go Video DDV9300 VCR

I simply need to know if you can help me find a new remote for the DDV9300 or a compatible substitute????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 140 Answers

I do not know what cable provider you have in your area. The best solution that I have used over and over again with replacing a remote since getting an original one is difficult but not impossible. Use remote controls that the cable company provides for its users. There is a small brochure that comes with it to help you program in the correct code. Most of these codes are brand specific and not necessarily model specific. I have always had success going this route in solving remote control problems. Give it a try. Those remotes enable you to program up to five or more units. Very good. God bless.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hava psvr71 vcr and a new Sharp Asquos tv and I cannot get the vcr to record. It will play back but not record.


The VCR doesn't have a digital tuner. It has an analogue tuner. So it won't pick up the digital TV transmissions. You need a Freeview box connected to the house aerial system, and then connected to the VCR by a SCART lead. Put the VCR on one of the AV channels so it "sees" the signal from the Freeview box as a predicament for its own tuner.

Some older TVs had a video out function. This no longer applies to new TVs.

Sep 15, 2014 | Proscan New Original PSVR71 Remote Control

1 Answer

I need to know if I can purchase a new remote for my vcr, and I need to know if this vcr is compatible with an HD TV?


You could try Curry's Partmaster website for the remote. As for the TV it will depend on the TV's imput sockets if you can connect it. Most VCR will only have a scart or S-Video connection. If the TV has these it will work. However even if you can the VCR will not record the HD signals or playback in HD. Though some HD TV's have what's called upscalling. Even so no vcr will ever be as good as a Blue-Ray. And those can record in HD.

Nov 25, 2010 | Sanyo VWM-700 VCR

1 Answer

Compatible TVs


I can help you with your Logitech Harmony 550 remote control.

The Logitech Harmony 550 remote control is programmed through the
Harmony Windows Setup Software.

Once installed, you will simply run the program and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 550 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Harmony MAC Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

Jun 06, 2009 | Logitech Harmony 550 Remote Advanced...

4 Answers

My vcr is not lested with u


Hi,

Can you please give the model no. of the govideo dual deck..

Jul 10, 2008 | One For All URC-3021 Remote Control

1 Answer

Need dvd code


Do you happen to know the model# of your Sylvania DVD/VCR player? That will help me access the correct codes for your set. Let me know, thanks!

Sep 24, 2007 | Philips PM3S Remote Control

3 Answers

Lost codes for 4 in one used for universal remote control


DRC800 Sanyo TV 0799,0154,0893 Panasonic VCR 0035,0162,1062,0616,0225,1035 press device key for 6 seconds led will blink solid key in code correct code will cause led to blink 3 times press power button to confirm code works. rg

Sep 09, 2007 | Philips 8-Function Universal Learning...

1 Answer

RE; Remote control TV/AV button doesn't work LXI series


Hi, Based on your post/description: 1. the TV is stuck to A/V; 2. you have two video sources - VHS & DVD (assuming both are external and both have A/V outputs with the VCR also with inputs); 3. you want to use either VHS & DVD, one at a time. You can do it the old fashion way, remove yellow, red, white RCA connectors from DVD and plug them at the outputs of the VHS when you want to use the VCR; or Connect the A/V outputs of the DVD to the inputs of the VCR, connect the outputs of the VCR to the A/V inputs of the LXI TV. Hopes this give you an idea. Post back how things are or should you need further information. Good luck and kind regards.

Aug 23, 2007 | Rio Go Video DDV9475 Dual Deck VCR

2 Answers

Parts for a govideo model # GV6650


http://www.govideo.com/Index.asp?GV=ProductInfo&Prod=DVD%20Players

Jun 26, 2007 | Rio Go Video GV6650 Dual Deck VCR

Not finding what you are looking for?
Rio Go Video DDV9300 VCR Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rio Televison & Video Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

JOHN TOPLISS

Level 2 Expert

142 Answers

Are you a Rio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...