Question about Tools & Hardware - Others

Open Question

I have an old rainco upholstery air stapler and all the lables are worn off.It shoots #7 staples and has a 2

It's about 20 years old,has a 2" nose and has the#209738 stamped on the side.How do I identify it in order to get a rebuild kit?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rowdy45176
  • 2176 Answers

SOURCE: Disassembled the stapler now need diagram to reassemble

Found user manual online but no parts breakdown, I have a phone number at 1-800-343-9329 and they might be to email you the breakdown. Wish I had better info but this is all they furnish online.

Posted on Mar 15, 2009

Ad
dayos
  • 4 Answers

SOURCE: FixYa RainCo R1b 7C -16

Hello; If the gun is AIR operated, adjust the AIR presure DOWN on the regulator on the air compressor tank? If it is electric operated! there should be a depth DIAL (say 1-8, 1 being the least depth and 8 being the most; depending on the hardnest of the item being stapled) trial & error to be tried on a scrap piece first......! hope this helps, John.

Posted on Aug 22, 2009

Testimonial: "Thanks for the help. I was geting ready to file the plunger."

  • 131 Answers

SOURCE: Please could you let me know where parts for RAINCO STAPIER R16.

You can get at airnailerparts dot com
Thanks,
Jeff

Posted on Jan 15, 2010

faceofftech
  • 185 Answers

SOURCE: I have a manual Craftsman stapler 68447 and an

you can try here:
http://cgi.ebay.com/NEW-ARROW-1-4-MONEL-STAPLE-504M1-/220606637809?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item335d2e26f1#ht_2432wt_911
I checked the crown website and it is a little bit harder to buy from them


if it works for you don't forget to rate me
thx

Posted on May 21, 2010

  • 13 Answers

SOURCE: staple jams by driver blade

The problem is wear on the sides of the driver blade. With the constant up/down movement of the driver against either side of the nose plate, it eventually narrows enough to allow part of the fine wire 71 series staple to find it's way between the driver blade and the inside wall of the nose plate. A new driver blade cures this completely. Rainco tackers have become a bit rare but the good news is, they're actually manufactured by Fasco and the Fasco driver fits into the Rainco piston by the removal of a single pin to allow the old blade out, replace with the new Fasco blade, re-insert the pin into the piston, then re-assemble the gun and you're away.

Posted on Apr 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the Arrow staples # 405 fit into my Craftsman 68464 staple gun ?


thats the picture of the manual staple gun
and the picture of type of staples you want

on the staple box confirms you can use the staples in that
sears craftsman
note the staple has inches and metric dimensions

all you need to check is the stapler eject system is not worn out
or cause a jam as you try to staple
if sticky .. try some sewing machine oil on the stapler workings

26310638-hzs5sth2pee3qtnt3nv3jepe-3-0.jpg

26310638-hzs5sth2pee3qtnt3nv3jepe-3-1.jpg

Oct 14, 2016 | Arrow Fastener 405 5/16" Flat crown...

1 Answer

What is wrong with my Senco pneumatic upholstery stapler?


only a guess but is the anvil sticking out the bottom where the staples come out . if so push it up a little with a flat blade screw driver .

Feb 23, 2015 | Senco Tools & Hardware - Others

1 Answer

Rainco stapler parts


Needs o'ring kit and lower bumper.

Nov 09, 2013 | Tools & Hardware - Others

1 Answer

What part do I need to remove to make a bostich MIIIFS floor stapler to shoot 2 inch staples


You shouldn't have to do anything to the MIIIFS flooring stapler to shoot 2" staples. It is designed to shoot 1 1/2" to 2" staples right out of the box. If your stapler won't feed 2" staples, check the magazine all the way up to the power head for any foreign material that may hold up your staples.

Apr 26, 2011 | Stanley Bostitch STB-MIIIFS Flooring...

1 Answer

Staple jams by driver blade in gun and I have to dismantle nose to get it out. Empire Rainco 7-16.


The problem is wear on the sides of the driver blade. With the constant up/down movement of the driver against either side of the nose plate, it eventually narrows enough to allow part of the fine wire 71 series staple to find it's way between the driver blade and the inside wall of the nose plate. A new driver blade cures this completely. Rainco tackers have become a bit rare but the good news is, they're actually manufactured by Fasco and the Fasco driver fits into the Rainco piston by the removal of a single pin to allow the old blade out, replace with the new Fasco blade, re-insert the pin into the piston, then re-assemble the gun and you're away.

Mar 06, 2011 | Nailers Empire Rainco R16 Stapler Driver...

1 Answer

The info on the gun says it will shoot many different staples, but it will only take 3/8 staples and I need to use 1/2 staples to do the job.


The T50P stapler uses T50 staples of various lengths, including 3/8, 7/16, and 1/2. Is it possible that the 1/2 inch staples you are trying to use are not T50? All T50 staples are the same width and should fit your stapler. There are several other widths of staples that are not T50, although T50 is the most common.

Nov 29, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

Air passes througt the trigger and won" t shoot


must dissemble the trigger mechanism and replace the broken or worn o ring that directs the air to the firing chamber.

Nov 25, 2010 | Stanley /Bostitch Sb 150SX Factory...

1 Answer

FixYa RainCo R1b 7C -16


Hello; If the gun is AIR operated, adjust the AIR presure DOWN on the regulator on the air compressor tank? If it is electric operated! there should be a depth DIAL (say 1-8, 1 being the least depth and 8 being the most; depending on the hardnest of the item being stapled) trial & error to be tried on a scrap piece first......! hope this helps, John.

Aug 19, 2009 | Staples Tools & Hardware - Others

1 Answer

Schematics on fasco air stapler #F1B 7C-16


Hi,
I can e-mail you schematics. I have all Fasco & Rainco parts for this tool and more in stock!

Aug 10, 2009 | Fasco Staple Gun Pneumatic F3c Atw-38 Mod...

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tools & Hardware - Others Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Brad Brown

Level 3 Expert

15950 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Are you a Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...