Question about Philips 20PF5120 20 in. EDTV-Ready LCD Television

1 Answer

Remote codes for dish network remote?

Cannot find the codes for our phillips 20pf5120 tv, to make it so we can use out dish network remote with it..Thanks, Roger

Posted by on

  • Anonymous Mar 16, 2014

    Remote code for 20pf5120 flattv

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

1. Mmanually turn on the device (TV, DVD, etc.)
2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
3. Press and quiclkly release the desired mode button 9TV, DVD, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device (TV, DVD, etc.) changes channel. The red indicator blinks once with each button press. If you accidentally overshoot the code required, use the CHANNEL DOWN button to backtrack through the library until the device again changes channel. Pressing the CHANNEL UP changes direction to forward again.
5. Press and release the MUTE button to install the code.


or try these
002 009 109 202 209 210 310 402 408 508 510 807 901 914 917 good luck its one of these!

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote code for 26" LCD Dynex tv


Remote code for who? Dish network? Comcast?

CableVision UR2-CBL-CV04 code: 096
Charter DIGITAL code: 0463
Comcast M1057 code: 0463, 10463
Cox COX code: 0463
Direct TV RC23 code: 10463
Dish Network VIP508 code: 720
Dish Network VIP622 code: 720
Motorola DRC800 code: 0463
One for All URC-6690 code: 0464
Phillips PDVR8 code: 115
Phillips PH5DSS code: 115
Phillips PHDVD5 code: 115
Phillips PMDVR8 code: 115
RCA RCU807 code: 135
Rogers DCT3250 code: 0463
Shaw DCT3416 code: 0463
Sony RM-VL600 code: 8043
TiVo HD code: 0091
TiVo SERIES 3 code: 0091

Jun 06, 2011 | Dynex DX-L26-10A 26 in. HD-Ready LCD TV

Tip

REMOTE CONTROL CODES FOR THE INSIGNIA TELEVISION MODEL: 42" NS-LCD42HD


This information was found on the insignia website www.insignia-products.com under technical information for the insignia television model :42"1080p NS-LCD42HD. cablevision-ur2-cbl-cv04.gifaligner.gif CableVision UR2-CBL-CV04
code: 096
charter-digital.gifaligner.gif Charter DIGITAL
code: 0463
comcast-m1057.gifaligner.gif Comcast M1057
code: 0463, 10463
cox-cox.gifaligner.gif Cox COX
code: 0463
direct-tv-rc23.gifaligner.gif Direct TV RC23
code: 10463
dish-network-vip508.gifaligner.gif Dish Network VIP508
code: 720
dish-network-vip622.gifaligner.gif Dish Network VIP622
code: 720
motorola-drc800.gifaligner.gif Motorola DRC800
code: 0463
one-for-all-urc-6690.gifaligner.gif One for All URC-6690
code: 0464
phillips-pdvr8.gifaligner.gif Phillips PDVR8
code: 115
phillips-ph5dss.gifaligner.gif Phillips PH5DSS
code: 115
phillips-ph5dvd5.gifaligner.gif Phillips PH5DVD5
code: 115
phillips-pmdvr8.gifaligner.gif Phillips PMDVR8
code: 115
rca-rcu807.gifaligner.gif RCA RCU807
code: 135
sony-rm-vl600.gifaligner.gif Sony RM-VL600
code: 8043
tivo-hd.gifaligner.gif TiVo HD
code: 0091
tivo-series-3.gifaligner.gif TiVo SERIES 3
code: 0091

on May 23, 2009 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

What is the remote code for Dynex 15" HD TV


Hi there,
Dynex TVs can have different remote codes, depending on the model of the TV you own and the type of remote you are using. You didn't specify your specific Dynex model number, however the company only makes one 15" HD TV model. It's therefore quite likely that you own model DX-15L150A11. Even if that isn't the exact model you own, the information below should apply to all 15", 19", and 22" Dynex TV models.
Below is a list of the most common remotes, along with the corresponding IR remote code for your TV.
CableVision UR2-CBL-CV04 code: 096
Charter DIGITAL code: 0463
Comcast M1057 code: 0463, 10463
Cox COX code: 0463
Direct TV RC23 code: 10463
Dish Network VIP508 code: 720
Dish Network VIP622 code: 720
Motorola DRC800 code: 0463
One for All URC-6690 code: 0464
Phillips PDVR8 code: 115
Phillips PH5DSS code: 115
Phillips PHDVD5 code: 115
Phillips PMDVR8 code: 115
RCA RCU807 code: 135
Rogers DCT3250 code: 0463
Shaw DCT3416 code: 0463
Sony RM-VL600 code: 8043
TiVo HD code: 0091
TiVo SERIES 3 code: 0091
For more information, you can visit your TV's remote code information page by clicking here, then clicking on the "Support/Downloads" tab.
Let me know if you need more information or have any other questions!
Sincerely, Ben

May 09, 2011 | Dynex Flat Panel Televisions

1 Answer

I can't find the instructions to program my Insignia remote to control my Dish Network receiver. Insignia model number is NS-RC01G-09.


It would be our please to help you with that. Here is a list of remote codes for addressing the DISH remote to an Insignia TV: 720, 000, 697, 834, 544, 538, 638. Press and hold the TV button until all mode button back lights come on, then release. Use the number buttons to enter the Insignia codes. Press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. Also remember to put the remote back in satellite mode. Thank you for being a valued DISH Network customer!

Phillip Chang
DISH Network Customer Support Representative

Jan 23, 2011 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Are your under cabinet mounted TV's Dish network compatable? If so what is the code for configuring the Dish remtoe to access the TV. It is not necessary that the remote control the DVD area.


We would be happy to help you with getting your DISH Networkremote to control your Venturer TV. We currently do not have any codes for the brand Venturer so we would need to perform a power scan. A power scan will scan your DISH remote for any codes that will work with your TV. Here are the steps for a power scan:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 11, 2010 | Venturer PLV36220CS5W-DC LCD TV

1 Answer

Remote codes to use dish network remote with emerson tv model lc320emxf


We would be happy to help you with getting your DISH Networkremote to control your TV. Pressand hold the TV button located on the top of your remote until all mode buttons at the top of the remote light up, then release. Use the number buttons to enter thecodes for your Emerson TV; here some of the codes we currently have: 764, 632, 648, 672, 654, and 516.Press the pound (#) button. To check that the code works try several differentfunctions on the remote to make sure it will properly operate the TV. Keep inmind that some codes may not be compatible with your equipment. If this is thecase, please try the other codes listed for that device until you find one thatis compatible with your equipment.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jul 25, 2010 | Emerson LC320EM8 32 in. LCD TV

1 Answer

Remote control code for dish network controler.sat.box vip211k


It would be our pleasure to help you with getting your DISH Network remote to control your Insignia TV. We're going to start by pressing and holding the TV button located on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your TV; here are some of the codes we currently have: 834, 538, 720, 000, 834, and 697. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Insignia TV until you find one that is compatible with it.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 13, 2010 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Need the codes to program my dish network remote ???


We're happy to help you with getting your DISH Network remote addressed to your TV. We're going to start by pressing and holding the TV button on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Vizio TV; here are some of the codes we currently have: 505, 598, 627, 520, and 627. Press the pound (#) button to save the code in your remote. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Vizio TV until you find one that is compatible with it.


We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 05, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

I have a 37 inch Olevia tv and can't find a remote code for my dish network remote


We would be happy to help you with getting your DISH Network remote to control your Olevia TV. We're going to start by pressing and holding the TV button located on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Olevia tv; here some of the codes we currently have: 910, 506, 578, 580 and 564. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Olevia TV until you find one that is compatible with your equipment.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 23, 2010 | Olevia LT42HVi 42 in. LCD Television

1 Answer

Dell tv 37 inch tv


My Dish Network remotes work on this TV using one of the Phillips TV codes- as Phillips makes this TV for Dell.

Sep 16, 2007 | Dell W3706MH 37 in. LCD HDTV

Not finding what you are looking for?
Philips 20PF5120 20 in. EDTV-Ready LCD Television Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...