Question about Durabrand HT-3915 System
The easiest thing to do would be to go to an electronics store, look on the back of the remote control package and look for Durabrand.
It should come with a booklet with the setup codes.
Thats all I got for now.
Hope that helped, good lukc, please rate.
Posted on May 10, 2008
Your regular TV set must be able to process the surround encoding through its output to where the Durabrand is taking the sound from.
Also, if you are using the TV set on a converter, Cable Box, or Sat receiver, and you are not taking the output from the component output there will be no surround from the source.
Surround sound is critical to how it is processed and applied.
Posted on Feb 23, 2009
Hi, the Panasonic t.v. more than likely has more than one kind of output. One of them should be actually lit up with a red glow around the edges, that is the fiber optic digital sound output. It's called a" TOSLINK" connector and is plugged into a matching jack on the surround sounds rear panel. The t.v. may also have a "LINE OUT", " T.V. AUDIO OUT " or " FIXED AUDIO " output this may be in the form of a small 3.5mm stereo headphone jack ( i still call them 1/8 in. plugs) this you can plug into the surround sounds line input on the back panel. If the line input on back of the theater system is rca just use a stereo headphone plug to rca adapter. I hope this helped and thanks for choosing FixYa, good luck-Prodzilla
Posted on Apr 16, 2011
Look here. They say it's not available.
ditto on eBay, just replacements...
Keep searching. I've seen some whole systems appear on eBay for the cost of just a remote.
Posted on Jun 19, 2011
Tips for a great answer:
Apr 15, 2011 | Durabrand HT-3915 System
Dec 23, 2009 | Durabrand HT-3915 System
Mar 15, 2009 | Durabrand HT-3915 System
Feb 22, 2009 | Durabrand HT-3915 System
May 10, 2008 | Durabrand HT-3915 System
Apr 30, 2008 | Durabrand HT-3915 System
21 people viewed this question
Usually answered in minutes!