Question about Veo Observer Network Camera

1 Answer

Need instructions to set up siemens 4200 modem for veo observer

Windstream "Up Graded" me. I needed a different modem for this "Up Grade". It is a siemens 4200. I cannot find instructions for opening ports in the modem so that it can access the web and be accessed from the web. I had it working with my old modem.
henryh@alltel.net

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Veo Master
  • 10,322 Answers

1st You download Webcam Driver.
Need instructions to set up siemens 4200 modem for veo observer
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Feb 28, 2013

1 Suggested Answer

SOURCE: veo observer firmware

http://www.gamblin.net/Veo/

Posted on Nov 17, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the hostname or ip number


Read this, please:

http://www.manualslib.com/manual/185934/Veo-Observer.html

http://www.kahunaburger.com/2004/02/22/binary-for-veo-observer-snapshot-tool/

Jan 24, 2013 | Veo Observer Network Camera

1 Answer

I need veo observer REPLACEMENT power supply dc+5v. I have a bunch of power supplies and I want to know how it would be labled


when replacing the power supply of your veo observer, be sure to check the required amperes and voltage are the same as in the damaged power supply that you want to replace.

Mar 22, 2010 | Veo Observer XT Network Camera

1 Answer

Veo Web observer Question


Hold the power button down for 6 seconds, this sets the Observer to factory default of user: "admin" and pass: "password" without the quotes of course.

Nov 30, 2008 | Veo Observer Network Camera

2 Answers

VeoNetwork Web cam


You can view your Veo Observer web cam at home by either of two methods. The first is to use the Observer Studio software that came with the camera. When you configured the camera, you selected a local (private) IP address for each Veo Observer, and set the address specific to each camera. You then put the same IP address into your Observer Studio Software.

Depending on the brand of router you use on your home network, your Veo Observer camera probably has a local (private) IP address in the format 192.168.0.xxx or 192.168.1.xxx where "xxx" is the actual address assigned to your Veo Observer (by you) and configured to display on the LCD window on the side of the Veo Observer.

You may need to log into your router to see which of the two local (private) IP address formats is used. Your router's user manual will show you how.

To view your Veo Observer, just type the exact local (private) IP address in your IE browser. for example, if you assigned address 100 to your cam, you would enter http://192.168.0.100 or 192.168.1.100 into your browser. Veo Observer will display the Language selection screen. Choose the language, then you log in and view your camera.

To view your camera from outside your home using another computer, you use the same method, but you have to substitute your WAN (public) IP address.

You can log into your router and select its STATUS tab to view your WAN (public) IP address. See you router's set up guide if you do not know how to do this.

An easier way to determine your WAN (public) IP address is to visit Gibson Research Shields Up! web page:

https://www.grc.com/x/ne.dll?bh0bkyd2

and scroll down to the last paragraph where you will find your WAN (public) IP address.

For example, if this address is 123.456.789.100, then you would enter http://123.456.789.100 on your IE browser. You should see the Language select screen, choose your language, then log in and you are now viewing your Veo Observer from outside your home.

Note: when you view your Veo Observer at home, you probably have a fast frame rate and smooth video motion. When you view your Veo Observer from outside the home, the frame rate is certain to be less, and your moving image quality will be choppy. This is normal, as viewing from outside the home is less efficient and the image suffers. There is nothing you can do to boost the frame rate.

Jun 15, 2008 | Veo Observer Network Camera

1 Answer

Veo wired web cam


username : admin
password : password

to reset it to factory default, press power button for 6secs, and you should see the number chagne to 300, then you can release the power button, the observer should turn off, when you turn it on again, it should now be back to the factory default settings

Jan 14, 2008 | Veo Observer Network Camera

1 Answer

No Wireless Camera Not Found


While you had it plugged in the serial port you should have set the SSID name for the camera? You may have to enter this manually to find the camera. If it is not set to broadcast this SSID, it will work but you must put it in the wireless connection settings.

Aug 08, 2007 | Veo Wireless Observer Network Camera

1 Answer

Voe observer down


Hi,


Can you help me? I have an Observer camera too. And I have the problem "no response from camera" (Veo Observer Studio) and I can't reach the camera via Explorer too (the page dosen't exist).
Earlier it is working well except the remote access. I try it resolve and came the problem: "no response from camera".

What was the solution at your camera?

thanks

May 29, 2007 | Veo Observer Network Camera

2 Answers

Veo Observer network camera


Make sure that you are using Internet Explorer 5.0 or higher. If you are experiencing problems, try upgrading to the latest version of Microsoft's Internet Explorer from the Microsoft webpage at: http://www.microsoft.com/windows/ie Method A: 1) Go to C:\Program Files\Veo Observer Studio and delete the files: xrlknc.dll and xrlkncd.dll. 2) After the files have been deleted, try using the Veo Observer Studio again. --or-- Method B: 1) Uninstall the Veo Observer Studio from your computer. 2) Download the latest version of the Veo Observer Studio from our webpage at: http://www.veo.com/Observer/firmware.asp if it still has the same promblem refer to your display or the grafix recommendations

Oct 15, 2006 | Veo Observer Network Camera

Not finding what you are looking for?
Veo Observer Network Camera Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Florin

Level 3 Expert

733 Answers

Are you a Veo Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...