Question about Nikon Coolpix 775 Digital Camera

1 Answer

System Error When I turn camera on I see System Error message I can't go beyond that

Posted by on

  • willamamba Jan 12, 2009

    I have exactly the same problem. Does anyone know how to fix it?

  • Anonymous Feb 06, 2009

    camera will not turn off, system error message appears. 

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem. It was because the lens had just begun to retract and then jammed. I tried pushing back it in to no avail. I was considering it was time for a new camara anyway. Hoping to get a little more life out of it, with nothing to lose I was about to take it apart to see if I could clean out any obstruction as other posts had reccommended. Before I did that, I let my Mr. Goodwrench cousin take a look at it. Instead of trying to force the lens back in, he pulled it out. Apparently the slight play in the lens allowed him to do so and whatever was jamming the lens from retracting must have fallen out. Suddenly, the lens retracted and the camara is working fine. So before you throw the camara away or take it apart, try pulling out on the lens housing. You may also have to move it slightly back and forth while pulling out to get whatever is jamming the lens to move out and away releasing the lens to retract again.

Posted on May 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lens error, restart camera


Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.

Apr 28, 2009 | Canon PowerShot SD850 IS Digital Camera

1 Answer

Zoom Error message


The problem you are describing is a problem with a sensor in the lens assembly of the camera. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.
http://olympusamerica.com/cpg_section/cpg_servicerepair.asp

Olympus will charge a flat rate repair fee for this product if beyond the one year factory warranty or the warranty is voided. The cost is $167.85 plus your local sales tax. This covers parts and labor, factory cleaning and diagnostic check, 6 month warranty and the cost of shipping the product back to you is all included in that price.

Apr 23, 2009 | Olympus SP-550 UZ Digital Camera

1 Answer

Lens error, restart camera


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Mar 01, 2009 | Canon PowerShot SD500 / IXUS 700 Digital...

1 Answer

Lens error, restart camera


Try to unstick the lens by gently pushing it in or pulling it out a little bit. IF that fails, the gears are too misaligned to repair it without opening it.

If you're out of warranty, there are third party place that replace them such as camera lens repairs.

If you want to do it yourself, there are also free camera repair guide websites that show you how to replace the lens, the replacement part is usually available on ebay.

Dec 08, 2008 | Canon PowerShot SD630 Digital ELPH / IXUS...

1 Answer

My camera {nikon coolpix l3}


You may not be able to.
If the lens was bumped or hit when it was out, it could have been damaged beyond repair (internal parts broken). It may be able to be pushed into position...see my posts on this problem and possible fix.
If you cannot turn it on and cannot turn it off... well, not sure. Some cameras will not continue when it detects an error in the system anywhere. Others are more tolerant.

Jun 08, 2008 | Nikon COOLPIX L3 Digital Camera

1 Answer

Sytem error 10


Hi - I found this info on the Nikon Australia website:

"System Error" or "Lens Error" message in LCD monitor trnsp.gif Question My COOLPIX camera displays a "System Error" or "Lens Error" message. What should I do? trnsp.gif Answer Having a "System Error" or "Lens Error" message displayed on the camera's LCD monitor would generally indicate that your camera needs servicing. A System Error is a general error which can be caused by many things: lens problem, CF Card problem, general camera failure, etc. To troubleshoot, please try the following:
  1. Use the memory card that originally came with your camera (or a Nikon approved card).
  2. Remove and replace the battery.
On the other hand, a Lens Error generally means that an error has occured during the lens operation. To troubleshoot, please try the following:
  1. Turn off the camera.
  2. Remove and replace the battery.
  3. Turn on the camera.
If the above tips do not help, your camera must be sent to our Nikon Authorised Service Centres, there are no user serviceable parts in our Nikon COOLPIX cameras. We apologize for any inconvenience caused and we will do everything to repair your Nikon camera as quickly as possible. Click Here for our Nikon Authorised Service Centres details.


Sort of like a Windows Restart to reset the memory.

Hope this helps.

May 09, 2008 | Nikon Coolpix 4600 Digital Camera

Not finding what you are looking for?
Nikon Coolpix 775 Digital Camera Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts

kakima

Level 3 Expert

96396 Answers

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...