Question about Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore elite washer oasis he, mod 110.27062603

The error code dl keeps flashing each time I try to run the machine. I have had this machine just over a year and it's been running fine until now.

Posted by on

  • 1 more comment 
  • afinebalance Nov 07, 2008

    My one year old washer is flashing the F1every time I start it. It will clear after restarting once or twice but it is a real nuisance. It also stops at the rinse cycle occasionally.

  • rvrea Nov 30, 2008

    I have had this problem for months and it just gets worse. I have to hit stop & start 4 - 5 times when I first start a load and then when the rinse cycle comes on another 4 - 5 times. It takes forever to get one load done if I am not around to here the beeping.

    Plus, the washer machine itself does a horrible job washing.

    There is an investigation going on with a possible class action suit. Not that it helps me now.

  • jpwolf72 Dec 03, 2008

    I have the exact same problem. When it fills, it beeps and flashes F1, and I have to stop and start it about 20 times. It also does it when it fills on the rinse cycle

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an oasis elite top load washer. My husband has replaced the door latch and we thought that solved the problem. Now when I turn it on to wash, a small amt of water runs in machine then it shuts itself off or either all the lights blink around the knob and it goes crazy. can you suggest what to do to fix it? the washer was purchased July, 2007

Posted on Dec 02, 2008

  • elease Dec 02, 2008

    My mistake I posted a "solution"; I meant to ask advice for the problem i'm having. any suggestions?

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 291 Answers

To andreya ,,, the code dl means door latch ,,,, you door latch is bad on your machine

to afinebalance ,,,, the f1 code is the control board and it too is going out and it isnt cheap ,,,,

if ya'll want to send me your complete model and serial numbers i will check on the parts for both or you.
Larry

Posted on Nov 25, 2008

  • sheffieldej Sep 08, 2010

    Maybe you can help me since you have a name and face on here! I, too, am having the same difficulty with my washer, Kenmore Elite Oasis HE model 110.27062603 serial CU0170106 Type 580, and have been suffering through laundry ever since buying this thing. I bought it from the Sears store, already returned mind you, for over $700! After less than a year and no warranty mine gave me the F1 error. Now I am getting it on all cycles and when the cycle is finished washing switching to rinse and each time its about 10-15 times I have to reset!! I am furious because a person we spoke to over the phone told us that they knew just what it was but wasnt allowed to share the information. She would however send someone out for a $75 fee to just "look at it" that didnt include the parts and labor. I called a 800 number that I found that was to look up recalls....there isnt one on this particular model. What I want to know is am I wasting my time shelling out dough to fix this or should I just break down and buy another one? I am not spending 400-500 every year!!!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both the coupler and the lid switch have been replaced yet unless you lift and close the lid it won't engage the spin cycle


Search Results

    Why am I getting an FL error code on a Kenmore Calypso ...

    www.shopyourway.com > Manage My Life > Questions
    I have a Kenmore Calypso washer model 11022062100 and there is water in ... Why am I getting an FL error code on a Kenmore Calypso washing Machine?
    fl error code on calypso washer-need help!! - Home Forumsths.gardenweb.com > Home Forums > Laundry RoomJul 22, 2006 - An FL error code keeps flashing on my Calypso Washing Machine. I can't do laundry. Could someone please tell me what I need to do to ..."F dl" light come on - Kenmore Elite HE3 Washing Machinehttps://www.ifixit.com/.../Why+is+the+%22F+dl%22+light+come+o...iFixitThese are the errors for error code F/dL Door Lock Error Condition A Door Lock Error... The Kenmore Elite HE3 is a washing machine by Kenmore. ... On Amazon I was able to get the CCU (Kenmore CCU Central Control Unit .... and a dose of WD40 on those contacts should keep that from misbehaving in the future as well.Kenmore Elite Calypso FL error code - ApplianceBlog

Jan 27, 2016 | Washing Machines

2 Answers

My Kenmore Elite Oasis washing machine has error code "UL" while in rising cycle and stop. Can you tell me what is the problem and how to solve it.


My Kenmore Elite Oasis washing machine will drain but not spin and it keeps jumping back and forth to different time cycles. It continually reads "UL" and I keep trying to adjust and balance the load but it does not help.

Jun 25, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Hello, I have a Kenmore Elite Oasis washer model


On this washer, the dl code indicates a failed lid lock mechanism. Pressing pause/cancel should reset the controls.

You may have to unplug the unit for 20-30 minutes, then restore the power.

If that doesn't work, the only other solution would be to replace the door lock assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!!!!!!!!!!!!!!

Jun 16, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

I have a model 27096 top load kenmore elite oasis he washing machine that keeps flashing code F2 and keeps turning itself on. Help


"F02" is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.

To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 20, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Hello.. I don't have a lot of time.. to work on this.. but wondering what the dl error codes is on a kenmore elite oasis washer model 110.27086603 serial #CT4070587


First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.27086603&pathTaken=partSearch

The DL code points to a Door Lock problem.

See the Whirlpool Service Manual for their Cabrio washer (basically the same as the Sears Oasis).

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf

It has troubleshooting and testing procedures.

Apr 28, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Machine keep flashing dl and that keeps the door from locking


Error code DL means door lock failure. Best off to call a certified repair company such as Sears.

Mar 20, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

I have a Kenmore Oasis Elite HE washer. I keep


On this washer, the dl code indicates a failed lid lock mechanism. Pressing pause/cancel should reset the controls.

You may have to unplug the unit for 20-30 minutes, then restore the power.

If that doesn't work, the only other solution would be to replace the door lock assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 11, 2009 | Kenmore Washing Machines

1 Answer

Kenmore Oasis has error code dl


The dL error code is a door lock error. The control board will attempt 6 times to lock the door before displaying the F dL error code. This is an indication that either the door lock is malfunctioning or the control board is not responding to the door locking circuit. Be sure the door is securely closed before attempting to start the washer. Open the door & check for clothing or something that may be stuck in the door boot area. If the door is securely closed & you still have the error code I would recommend having the door lock assembly replaced.

Good Luck and Please rate

Jan 11, 2009 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

For the kenmore elite oasis he top load washer, what does the error code DL mean and how do i fix it


We jamed a straw in the door lock so the sensor thinks there is something in there

Jul 02, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

1,162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...