Limited color on screen primarily blue, white and green. I use to be able to fix by giving the screen a gentle wiggle but color spectrum is gone.
I've already attempted to adjust the red tint to no avail. if i lift up one side of the tv approx. 2'', the complete color spectrum returns back to the screen. The tv is only one and a half years old and has never been moved since the day of install?
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: limited color on screen primarily blue, white and...
Sounds like you have a bad joint on the tv circuit board somewhere.There is another thing it could be if you have a scart lead connected. Pull it out and check to make sure none of the pins are dissapearing inside the plug. Sometimes they slip inside. Check both ends of the lead.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try this one. Car Radio Battery Constant 12v+ Wire: Light Violet
Car Radio Accessory Switched 12v+ Wire: Green
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Light Blue/White
Car Stereo Dimmer Wire: N/A
Left Front Speaker Positive Wire (+): White/Green
Left Front Speaker Negative Wire (-): White/Black
Right Front Speaker Positive Wire (+): Yellow/White
Right Front Speaker Negative Wire (-): Yellow/Red
Left Rear Speaker Positive Wire (+): Brown/Black
Left Rear Speaker Negative Wire (-): Brown/Green
Right Rear Speaker Positive Wire (+): Light Green/Yellow
Right Rear Speaker Negative Wire (-): Orange/Black
Plasma screens are extremely susceptible to getting broken from any impacts to the face of the screen. What you are describing sound very much like distorted or dead pixels. It may not be a fixable issue, you may have to replace the entire unit or live with the purple bar. The reason you don't notice it as much when the screen is dark is because purple is on the darker end of the spectrum, and will be most visible in contrast to lighter ad brighter colors.
I painted for many years. And now work with photoshop each day. The selected grey was probably in the blue family instead of yellow family. Most interior colors look better if they come from the warm yellow family, including greys. There are greys for every color in the spectrum ... from yellow to red to blue. If you pick a grey with bit of red, it will start to look mauve. Orange and it will look brown. Blues inside the grey will turn purple real quick. Moreover, all colors and finishes are contextual and pick up surrounding colors. Especially satin-or-shiny finishes, because they pick up local colors that change intended hue. For example blue drapes will turn white room bluish. If the house next door is red, and the light comes in window, it will turn white room into pink. Green leaves, and the light from window turn white room green. So when you pick a grey that has bit of blue, the color can change for many reasons beside light bulb. Each room is totally different. Most folks pick colors by looking at color chip in the store, instead of painting a section of wall inside home. And most folks do not ask the paint store clerk which tints are in that particular color. Sometimes the black tint will turn some bases into a bluish hue. Go back to paint store and get another grey color from the yellow spectrum.
Although I am not sure what this has to do with dryers, the color spectrum of a rainbow runs from purple to yellow. The visible spectrum runs from black to white with ultraviolet and infrared beyond the visible spectrum. Purple, violet, blue, red, orange, and yellow are the colors in a rainbow.
GE Network Wall PlateCat5 Ethernet Cable
White / Orange
White / Green
White / Blue
White / Brown
Brown GE Network Wall PlateCat5 Ethernet Cable
White / Orange
White / Green
White / Blue
White / Brown
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Finally found this solution! It is a connection issue at the bottom of
the phone where you would plug in the cable to hotsync your phone.
Put in your hotsync cable and wiggle it around really good and it will
fix the issue. Do this with the battery out and then pop it in until
you have fixed the issue. Took me a few tries as I was worried about
how hard to do it, but no problem!
Buy a new printer. I am having the same issue. I have cleaned the ink and the cartridges are pretty new. Deskjet 895Cse is an older model and they are relatively cheap to buy now a days. I will be looking into a different orinter this time though.
go into menu turn color off see if you have a black and white picture if not adjust red,green, and blue screen drive on controls in back of tv you have red, green, blue it will have focus /screen controls cover each tube do one at a time blue focus and screen drive adjust to clear blue picture do all 3 tubes, then adjust them to where you have a black&white picture once this is done turn color controll back on.Thank You for using FixYa and Have a Nice Day.