- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check num lock key of laptop press num lock if numlock key is on and off when you press it then dispaly working fine only issue with screen resolution . For that when you power up the computer press F8 key then enter in enable vga mode. Then go to start menu ->control panel->display->settings. Change screen resolution to 1024*768 then apply and ok. But if num lock is constant when you press numlock key then you need to refix RAM memory.Open back cover of laptop then refix RAM memory. Then check if still same issue then pull cmos cell from motherboard then check again if still same then try with another RAM . When you power up the computer press F1 or F2 or "del" key if you are able to see bios screen then you not need to open back cover of laptop only make sure SATA is disabled and your harddrive is detected in bios. Let me know if you need further assistance. Thanks for using FixYa.
Most laptops are this way, but yours may be a special case. Most have two ports one is underneath a removable panel on the bottom of the computer, and the other is under neath the keyboard. To remove, look to see if you can remove the area between the keyboard and screen, if not find a screw or screws on the bottom of the keyboard labeled "k", once those are off the keyboard is loose and is just lifted off.
Always remember to not prey to hard,if it is going to come off it will come off without struggle, and have your battery and power disconnected first, and the computer is off...