Question about Symphonic SC309C 9 in. TV/VCR Combo

1 Answer

No sound when i turn on my tv, i can not hear the sound from speaker.on the bar graph it displays volume on all the way 100%.i do not have a remote controll for the tv and do not know if a universal remote controll would fix my problem?if i stick my headphones in the earjack nothing is heard but if you angle the minni plug fom the head phones in the earphone jack,ithen you can hear sound from the tv until you release the pressure of angling the minni plug(almost like a lose connection?).also the audio r/f output jack does not work but the video r/f output jack does work.does anyone have an idea how to fix this?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Is there sound at  AV OUT  pins  check  with any  amplifier ,  if sound is coming  then  there should be  AUDIO AMPLIFIER IC gone . and  replace it  with same number....
if sound is not coming   then  inside TV kit there should be CHROMA IC gone   and replace it with same number,

this will solve  ur problem

thanks

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Increase audio volume dvd


In the sound program there should be a sound looks like a speaker with a slide bar, increase to proper place. Also on the desktop lower right should be a icon that looks like a speaker, click on it and the whold sound control opens, again there should be a master volume....

Oct 28, 2013 | Sylvania Combination Televisions

1 Answer

VOLUME STUCK


you use auxilry port in your tv as volume problem volume out from direct TV cable bos insert in tv auxilry port

May 17, 2012 | Panasonic PV-DM2799 27 in. TV/VCR/DVD...

1 Answer

I have a sharp tv with the volume at its highest but i can't hear anything


Hello
Check its speaker first. If voice coil of the speaker or tis cone paper has damaged, speaker will produce a dull low sound output. If the speaker is found OK, check the audio output section of the unit. This section circuits can be located inside the TV circuit board. look for any loose or bad soldering terminals at the audio output IC. It is best to resolder all the suspected solder points by applying a little more solder, withut making any solder bridge short in between adjecent solder terminals. If this also does not help you, replace the audio output IC. It is damaged. OK.

Dec 26, 2011 | Sharp 13VT-R100 13 in. TV/VCR Combo

2 Answers

The volume up button on the remote and the tv are not working at all and the volume down button works but it does not turn the volume down instead it cycles through what seems to be different modes of...


SEEMS TO BE STUCK IN MENU MODE ,TRY PUSHING THE MENU KEY ON YOUR REMOTE AND THEN PUSH IT AGAIN,,HOPE THIS HELPS.YOU CAN ALSO HIT THE MENU BUTTON ON THE TV ITS ON THE LEFTHAND LAST BUTTON....

Jul 15, 2011 | Samsung CXD1342 13 in. Combo

1 Answer

I have no sound on my LG32LB9D


Hello
You haven't specified anything about the condition of picture. So I thinks there is no sound; picture OK; and posts this solution. Check out the speaker first. Just place your ear very near to the speaker side of your TV and switch the TV 'ON', by using its main power ON/OFF control [Not with remote control handset]. If you can hear a 'thumb' sound from the speakers the speaker is OK, and the sound output section inside the circuit board of your tV is faulty. Either sound card or audio output IC may be replaced. If you can't hear any 'thumb' sound when you switch ON your TV, the speaker is faulty. Replace the speaker with samee type and impedence. Its impedence will be marked on its magnet [in terms of Ohms]. OK.

Jul 01, 2011 | LG Combination Televisions

1 Answer

No sound ...volume graphic is working on screen however...will remote speakers work if not fixable?


everything is fixable the remote only sends a signal to the tv to do what ever you want it to do if there is no sound from the tv then the remote wont work the sound either but an easier solution is to fit external speakers to the tv most older sets with have ext sockets then problem solved a pair of cheap speakers or hook up a 5.1 system for better sound quailty.

May 24, 2011 | Toshiba Combination Televisions

1 Answer

I can't get the sound to come on. When I mash the volume button i


You gave no brand and model, but some general possibilities. Check the menu in the audio/sound options. Be sure the speakers are "ON" as sometimes they get inadvertently switched off. Some models have a manual speaker switch in the back. Also if this has a headphone jack this could possibly be causing the prob. The jack on some combos can go bad. Plug in a headphone and see if you have audio. Turn down the level, however, to avoid hurting your hearing. If you have audio with phones then unplug the headphones and it may bring the sound back. If not the jack may need replacing.

Nov 25, 2009 | Combination Televisions

1 Answer

No sound,volume bar works


Sorry I dont have a manual but it is available at http://www.servicemanuals.net If you put your ear close to the speaker, with the volume turned up, do you hear any hiss or buzzing? If you dont it could be a bad speaker,headphone jack(if there is one), or the audio output IC or ascoiatated componets. If there is a hiss, then theres a problem with the audio processor or switching IC. If your not a tech, you should not be experimenenting around inside this TV set!

Sep 01, 2006 | Emerson EWC1903 19 in. TV/VCR Combo

1 Answer

No sound,volume bar works


Sounds like it may be something you did. Have you checked to see if you accidentally put the sound on mute? Try hitting the mute button on the remote control. Also, if the TV has the option to turn of internal speakers (which you would likely find in the menu under audio settings if it does) make sure they are turned on. If these checks fail then we have an electronic problem to deal with.

Aug 31, 2006 | Emerson EWC1903 19 in. TV/VCR Combo

1 Answer

No sound


Check first if theres a speaker cutoff in the menu of the set or the back of the set. Next see if theres a headphone jack and plug in a set of phones to see if you get sound. If you do a connection on the jack is bad. if you put youe ear right next to the speaker and hear a little background noise or a little sound then its probably in the volume control curcuit. if you hear nothing at all its the audio output IC or the speaker itself is defective. Good Luck

May 17, 2006 | Philips 21PT6818 21 in. TV/DVD Combo

Not finding what you are looking for?
Symphonic SC309C 9 in. TV/VCR Combo Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

68258 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Symphonic Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...