Question about Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

CE Error code - Whirlpool Calypso GVW9959K Top Load Washer

Posted by on

  • tphillips040 Dec 30, 2008

    when i select what type of wash i want to do then push start it acts like its going to, you can hear the water run then it stops and on the control panel it says, "CE" and stops

  • KonaSun Jan 18, 2009

    Washer Starts, water runs, then it stops and I get the error code CE

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

Ce is communication error could be a bad connection between the 2 boards.( i doubt that) or the drive motor protection open. or the motor controller is bad. there is a notn replacable fuse on some of thos boards. check to see if it is open. Make sure you unplug machine.if it is open replace motor control board. Part #8541034

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the problem with my washer whan it has an erorr code CE ?


You have to tell us make and model to get a precise answer.

On many washing machines CE means communications error which is either a failure of the control board or some item controlled by the control board. It may be time to call the repair man.

Apr 18, 2015 | Washing Machines

1 Answer

What is CE error code on LG TROMM WM1814CW


According to page 21 of the owner's manual, the following are known error codes: IE= Water Inlet Error, OE=Drain Error, UE=Unbalance Error, dE=Door Error, tE=Thermistor Error, FE=Overfill due to Faulty Water Valve, PE=Water Level Sensor Error, CE and LE=different Motor Errors, and PF=Power Failure.


its a motor error
check the brushes

Jan 03, 2015 | LG WM Washing Machines

1 Answer

Ce code and leaking water after repair of the ld code. Ld code was present and the washer was full of water. Took washer out and turned over removed the drain motor and took it apart and cleaned out all...


CE Communications ErrorIf there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.


Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 11, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

CE code and leaking water after repair of the LD code. LD code was present and the washer was full of water. took washer out and turned over, removed the drain motor and took it apart and cleaned out all...


CE Communications ErrorIf there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.


Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 19, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Error code CE When I turn the washer on it start then turn back off, then error code CE flashes on the display.


CE Communications ErrorIf there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.


Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 10, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Code ce shows we have tried to reset and the code CE come up each time


"CE" Communications Error If there is any breakdown in communication between the machine controller and the motor controller, "CE" flashes and the unit beeps once.
Some common causes of "CE" errors include:
·Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.
· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.
· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a "CE" error will occur.
· Drive motor thermal protector has opened.
·Motor controller is not powered or fuse has opened. Replace motor controller.

Press STOP/CANCEL to clear the display.

Nov 29, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Kenmore Elite Top Loader "CE" error code.


CE means communications error

If there is any breakdown in communication between the machine controller and the motor controller, "CE" flashes and the unit beeps once.
Some common causes of "CE" errors include:
·Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.
· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.
· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a "CE" error will occur.
· Drive motor thermal protector has opened.
·Motor controller is not powered or fuse has opened. Replace motor controller.

Press STOP/CANCEL to clear the display.

Dec 27, 2008 | Kenmore Oasis HE 27082 Top Load Washer

3 Answers

AEG LAVAMAT 74620 - Washing Machine CE error code


Replace Water distributor (Dispenser Drawer) then will be Ok

Rafiq

Aug 27, 2007 | Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...