Question about NorStar BCM-T7208 Corded Phone

Open Question

Norstar M7208 call for you - NorStar BCM-T7208 Corded Phone

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Norstar M7208 telephone

This could be because you have several mailboxes/extensions set up. We've had the same problem in our office.

As a result, from the phone that reads "Messages for you" you can find out which mailbox is attached to the phone.

1. Press "Feature"
The display will read: "Set: ???"

The numbers shown in place of the question mark will be the numbers to the mailbox attached to the phone.

2. Press "Feature"
Enter 981 for voice mail access

The display will read "Login: "
Enter the numbers from the previous action, and if you don't know the password, attempt to use the default passwords of 0000 or 1234.

This worked at our office. I hope it works for you.

If not? We find the site http://nortstarsupport.com VERY helpful.

If you don't know the password, but have access to the system administrator login, you can reset the password for the set you are trying to retrieve messages.

Good luck

Posted on Mar 03, 2009

ynotphone
  • 192 Answers

SOURCE: How do you page with a Meridian Norstar M7208

There is another page, acting more like a directed intercom page...

If you want to talk to someone and you know where they are (general area) you can do a FEATURE 6 6 and the extension number.

This is a direct page and when you page this way, that person can respond back and you can hear them.

Posted on May 02, 2009

  • 4 Answers

SOURCE: How do you set up caller ID on a Norstar M7208

There are a few other things you need before it will just work on your phones. You need to get Caller-Id activated by your carrier on each of the 4 lines. You also need to make sure your system has a Trunk card capable of Caller-Id. The card in your systems should be labeled CID.

After this you still need to program the lines for Caller-Id in the configuration section of programming.

Posted on Jul 30, 2009

  • 5 Answers

SOURCE: My Norstar M7208 phone wont ring. We've moved

Is set relocation on?
If not then probably what has happened is that the new station port does not have ringing programming of the old port.
if you know how to do this go into riging programming of the set and activate it

Posted on Aug 04, 2009

consultel1
  • 860 Answers

SOURCE: Norstar M7208 - Only 1 of 3 phones will ring

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should sat line 001: appear only press CHNG til it says appear &ring.
press next key (lower right arrow)
The display should say line 002: appear only
Repeat same procedure as line 001 til all available lines are done
press the release key when finished

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nortel Norstar M7208 always reads "Calls For You". What can i do to clear display?


This is Caller ID log

FEATURE 812 View Call Log
FEATURE 813 Manual Call Log
FEATURE 815 Deletes Call Log Items


To have no log see your office administrator or call your local tech to De-program your phone from the system log.

Nov 28, 2012 | NorStar M7208 Corded Phone

1 Answer

The "New Message Notification" will


To remove an incorrect New Message Notification, type

Feature + # + 6 + 5

Mar 08, 2011 | NorStar M7208 Corded Phone

1 Answer

Do the Norstar M7208 and Aastra 9120 phones compatible on the same PBX? I have a M7208 that works fine on current PBX, but new Aastra 9120 doesn't work. Should they both operate on the same PBX?


No, the M7208 is a propriatary set which requires the PBX to function, whereas the aastra phone is a stand alone set which requires a standard telephone line and a power source.

Dec 23, 2009 | NorStar M7208 Corded Phone

1 Answer

Doesnt ring


My BT Meridian compact does not ring after it powered down in a thunder storm. The lines flash and can be answered as normal just no ringing sound

Mar 14, 2009 | NorStar M7208 Corded Phone

3 Answers

Norstar M7208 display screen garbled


Increase the contrast of display of ur phone it might fix the problem

May 13, 2008 | NorStar M7208 Corded Phone

1 Answer

NorStar M7208


Reboot the phone system.

Unplug the main control unit.

Jan 10, 2008 | NorStar M7208 Corded Phone

Not finding what you are looking for?
NorStar BCM-T7208 Corded Phone Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...